|
alright lets see what i can add in here:
What: Passenger Under-seat tray Slider drawer from 89-92 PGT
replaces factor sub box.
Modification req'd : mounts in same location(for those who dont use that subbox due to aftermarket stereo) No drilling required, However it will not fit DX seats. You'll need both brackets and the drawer, thats it!
Get more storage room!
What: Aluminum rx-7 Scissor jack. For those who want to lose a few pounds but still have a jack, one weighs about 3-4lbs compared to the nearly 10 our stock one weighs, fits in the same spot, no modification required
What: Aluminum 16X5 5-lug Rx-7 Space saver. Weighs alot less then our stupid tiny steel ones, looks alot better... Fits perfectly in the trunk
Found on: All rx-7 convert's, 87-91 rx-7 Turbo, and 89-90 rx7 GTUs<(not just GTU, has to be a GTU-s)
What: 89-91 Rx-7 Fuel pressure regulator
Modification required: use longer length of fuel line because outlet is shorter.
Fits int he same flange, i noticed 2psi more basepressure... i dunno might be worth it if you've got it apart
What: 2g pgt/mx6 LS KL Spark plug wire holders, the ones that mount on the intake manifold
Modification required: cut a little notch to fit the little nub on our valve covers.Holds the plugwires Up higher because bracket is horizontal, not almost vertical.
What: 3-4 Psi Pressure switch-gotta thank rebel2k4 for this one
Switch turns on at 3-4psi, However with a boost controller inline with this switch, you can use it to turn on some extra injectors or N20 at any pressure above 4psi.
Found only on: Old Volvo Turbo's, the Non intercooled ones. Switch is blue and yellow and located on the firewall in the middle near the valve cover.
Modification required: well, this should be self explanatory
What: 88-91 929 Master Cylinder w/resivour.
why?: its basically the same, except the resivour is alot larger and better shaped.
modification required: NONE, just make sure the lines are the right side, they'll differ depending on ABS or not(same as your car) you can just use the resivour if you trust yourself enough to get it out in 1 piece. I sat at the hub autozone store for an hour and tried 11 different master cylinders, they all sorta fit, only the 929 fit perfectly(i had a brake booster sitting there to compare)
Thats it for now... ill think some later..
-Eric
|