Okie, my turn to bring up an old thread.......
ok, referring to the pic above, I would need a one channel amp, putting out 500 RMS (assuming both subs are 250rms each) ok, now, what would be the difference if i have a 4 ohm load on each sub (final load going to the sub) (like the pic above), only with a 2 channel amp,putting out 250rms on
each channel?
what is the difference, and which do you recommend that i do?
should i have a the subs wired separately into a 2 chan amp (250rms X 2), or wire them together going into a 1 chan amp (500rms X 1)