Quote:
|
Originally Posted by Einstein
There is no mention of adjusting the throttle stop, as this is factory set, and should not be touched..
John
|
However, if you've removed the TB or swapped it for a rebored one, your stuffed if you don't adjust it...
Usual Mazda - only giving us half the needed info.
Quote:
|
The idle speed should only be adjusted with the FEN & TEN jumped, and should be set to 650 +/- 50 rpm
|
I disagree here John. If the idle is set to 650+/- with the jumper in place it will be far too high when it's removed. As I found out to my cost.