MX6.com - View Single Post - Maximum lift of custom cams on stock valves/retainers.

DRAG323 · 7-1-05, 11:51

The hla don't take more .040 or 1.0 mm if you regrind the base circle
of the cam.

The max duration when you regrind a cam is: 262
Nose of the cam is more round
the lift stay the same: .354

Eric

7-1-05, 11:51	#3 (permalink)
DRAG323 Join Date: Aug 2004 Location: iTrader: (0)	The hla don't take more .040 or 1.0 mm if you regrind the base circle of the cam. The max duration when you regrind a cam is: 262 Nose of the cam is more round the lift stay the same: .354 Eric
DRAG323 Join Date: Aug 2004 Location: iTrader: (0)