MX6.com - View Single Post

**Oddball** · 2-16-07, 17:25

First of all Tom, the person that posted the thread (KEN) is not the person providing the service.

You can try the address given at the end of the thread, but please consider the thread is also 4 years old. The tappets on these motors are HLA's, hydrolic, therefore you cannot tighten them up, you can try cleaning them or replacing them.

Oddy.

2-16-07, 17:25	#3 (permalink)
Oddball Join Date: Jun 2003 Location: kent, UK Age: 40 iTrader: (3)	First of all Tom, the person that posted the thread (KEN) is not the person providing the service. You can try the address given at the end of the thread, but please consider the thread is also 4 years old. The tappets on these motors are HLA's, hydrolic, therefore you cannot tighten them up, you can try cleaning them or replacing them. Oddy. Last edited by Oddball : 2-24-07 at 7:56.
	Current Ride and new project- 93 Cavalier Turbo, running approx 260 at 12psi on phase one chips. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ R.I.P 92 2nd gen HYBRID - ZE cams, ZE inlet manifold, Mag leads, 65mm TB, CAI, Tokico shocks springs, SS headers, SS DE-cat, SS Scorpion cat back, 17in Wolfrace Osaka alloys - pics ==>My Album