Quote:
Originally Posted by LARKEN
Those stock ports looked rougher than most. Are you going to enlarge the exhaust ports for a bigger manifold ? Stock is 1.4" I went to 1.625"
|
Yes these ones are rougher, in and out, i didnīt see other original to compare, but for shore this ones were not good.
Do you have pictures of other ones original.
Iīm going to match the size of exhaust with gasket, because i will use the stock manifold (i donīt have other)
I will try later to post some more pictures.
This is not a big porting, first i donīt want too much, and also i donīt have machines to make better work.