[Jrod88]

COVER YOUR SEATS!!!

Go up top and cover your seats with something, I used an old towel.

Next you want to remove the Center console using the phillips head screwdriver. Six bolts is all that holds it on: 2 under the rear ash tray, 2 under the panel for the E-brake, and 2 on either side of the radio console.

Note: The panel for the e-brake is held in by one tab at the top that slides into the console, closest to the back seat, and a pressure clip at the bottom where the tray is. Make sure the e-brake is up then all you have to do is pull near the tray where the rubber slit stops. You may have to flex it a little to get the tab out. After that it should just pop out. You shouldn't have to use any tools to remove this.

After you remove the console you need to remove the insulation around the shifter.

This is what it should look like: