MX6.com - View Single Post

**megalomaniac32x** · 8-12-07, 15:16

the only difference i found in the combo switches was the cruise connection. all the other connectors pluged up and worked properly on my 626. the 1ga switch used a 4 wire 4 pin connector and the 1gb switch had a 3 wire 4 pin connector. i switched mine to get variible intermitten wipers cause my dx 626 didnt have it.

8-12-07, 15:16	#77 (permalink)
megalomaniac32x Non-Turbo 626 Join Date: Mar 2005 Location: Plano, TX, USA Age: 32 iTrader: (2)	the only difference i found in the combo switches was the cruise connection. all the other connectors pluged up and worked properly on my 626. the 1ga switch used a 4 wire 4 pin connector and the 1gb switch had a 3 wire 4 pin connector. i switched mine to get variible intermitten wipers cause my dx 626 didnt have it.
	91 626 DX, 89 F2T swapped, probinator chipped ecu, 2.5 inch exhaust and downpipe, zebel housing, 10 psi, mazdaspeed FSTB, blaster2 coil, pacesetter sts, rstb and lower tie bar, suby calipers, rear disc brakes, PGT rear swaybar, eibach springs, MSD 6A http://www.cardomain.com/ride/2146610 http://www.dfwmazdas.com