Hi everyone, ive got a slight problem thats more anoying than anything else.
I'm finding my clutch is sticking in about 60% after i change gear, i can lift it with my foot and it springs back up. if i pump it up out of gear (at the lights for example) it will be fine for about a min or so then it go's back to holding in 60% of way. if i leave it half pushed in i can still push it in the last 40% and change gear each time (also it does not slip the clutch at all)
I have bleed the clutch the way i think im supposed to but it hasn't helped.
Also i dont leak any clutch oil anywhere and the level does not go down.
The way i bleed my clutch:correct me if im doing this wrong,
pump up clutch so its firm and springs back each time, hold down clutch flat to floor while someone releases the clutch bleed nipple and lets out the oil, close nipple before releasing the clutch again,
repeat this 4-5 times whilst making sure you do not run low of fluid in the clutch res.
Hopefully ive just over looked something easy
