Quote:
|
any chance of grabbing an f2 piston and photographing that with the f2t one?
|
sorry i dont have a f2 piston laying around here.
did something useful today though
f2t piston is 28 cc.
my fe3 head is 47 cc ( might be shaved a little before i got it )
head gasket is 1mm
so with f2t pistons in a stock fe3 ( means cranck and rods) gives a 7.2 cr acording to my calculations ( feel free to check)
thats to low for me but might be a good idea if someones interested in pushing some bigboost in a fe3.
have to recalculate it with the 2.2 crank. i did calculate it but asumed that the cupper fe3 head gaskets were 1.6 mm thick but just heard they were 1.1.
so... to be continued