|
boyzero,
i will post pics of throttle body and its flange this weekend. I'll also take a picture with it in the approximate location for the asymmetric version. The flange has a 75mm opening for the throttle body and is 4"x4" on the outside. The plan is to have an adapter section which grows the plenum from 2"x3" to 4"x4" at the flange for the asymmetric version. I am very much leaning towards the asymmetric version for the initial build. If I am not happy with the results of that, I will fab a symmetric version. Since the air will only enter one runner at a time, I am thinking the asymmetry of inlet on driver's side won't be an issue.
Reuben
|