Quote:
Originally Posted by BLWNLT1
I bought an MX6 4 cylinder 2.0l about a month ago. Was told it needed a head and a timing belt. So I finally got around and tore into it yesterday. Took the head off in about 30-45 min. Well anyways this is a standard car and wanted to check the cylinder walls so I put it in 2nd gear and a friend and I gave it a push and noticed right away that cylinder #1 (far passenger side) did not move at all. So this thing let go of a rod. I have looked around but cant find any sources to purchase rods and a possible crankshaft to get this car going. Any help would be appreciated.
thanks in Advance,
Joel Rodriguez
|
So are you just going to try to throw this stuff in or are you going to have it put together by a machine shop? Depending on the answer I will know what advise to give.
