|
little update, I got the tails and I started messing with them.. and it looks like my plans will change a little bit.
Im not exactly exicted about using a dremel disc to cut the lens of the tail lights like robii did.. They wont seal up the same since you will see where I reglued them.
So I tried to bake them in the oven like people have done with our headlights and fog lights. Wich was a no go, the clear lens gets soft and bends before the glue even starts to melt.. I tried letting them cool and I chiped one of the lens, however its in a inconspicuous area.
also doing the leds in a full pattern might not be do able...unless I cut the back of the housings off.
|