MX6.com - View Single Post - Pictures of aftermarket tail lights (eurochrome,cf, black)

**KING6** · 1-13-08, 15:02

There is room for LEDs to be inserted into the rings in the back, however the rings have a bevel to them, so there is no surface for the leds to face out.. they would have to be at an angle...wich wouldnt give much of an appearence since leds are directional

If you look at the back up light, I already drill holes for LEDS in it. I might be keeping all of the bulbs and do a bulb/led combo. bulb running lights, LED for brake and signal. The leds dont light up the entire lense housing like the bulb does... im still experimenting with them.. All I did was flash an LED flash light through the housings to see what kind of light output id get.

1-13-08, 15:02	#35 (permalink)
KING6 Join Date: Oct 2002 Location: Central, USA Age: 24 iTrader: (13)	There is room for LEDs to be inserted into the rings in the back, however the rings have a bevel to them, so there is no surface for the leds to face out.. they would have to be at an angle...wich wouldnt give much of an appearence since leds are directional If you look at the back up light, I already drill holes for LEDS in it. I might be keeping all of the bulbs and do a bulb/led combo. bulb running lights, LED for brake and signal. The leds dont light up the entire lense housing like the bulb does... im still experimenting with them.. All I did was flash an LED flash light through the housings to see what kind of light output id get. Last edited by KING6 : 1-13-08 at 15:05.
	The King OF AFTERMARKET/USED PARTS F/S < 94/LS-T -possibly for sale. B.O