MX6.com - View Single Post

**Adaman** · 1-16-08, 4:54

Hey guys. I just picked up a guys turbo project with a new rebuilt motor and tranni. Eveything is mounted and installed except for the intercooler and a few other things. The car has msd coil ignition and he put in a mass air flow sensor; along with a ton of other things. I need an ecu though. Megasquirt looks like my best bet.

I have a probinator chip. Could i edit the chip with the correct fuel maps instead of megasquirt?

Also the cams in the car have been ground to give the car around a 10:1 compression ratio. (Really close to there.) Some people run their ZE cams with a turbo and some say not to?

1-16-08, 4:54	#1 (permalink)
Adaman Join Date: Nov 2004 Location: Oregon City, OR, USA Age: 21 iTrader: (0)	Finally boosted...Almost...help Hey guys. I just picked up a guys turbo project with a new rebuilt motor and tranni. Eveything is mounted and installed except for the intercooler and a few other things. The car has msd coil ignition and he put in a mass air flow sensor; along with a ton of other things. I need an ecu though. Megasquirt looks like my best bet. I have a probinator chip. Could i edit the chip with the correct fuel maps instead of megasquirt? Also the cams in the car have been ground to give the car around a 10:1 compression ratio. (Really close to there.) Some people run their ZE cams with a turbo and some say not to?
	In the Works: KLDE with T3 Turbonetics turbo/ .60trim, 370cc injectors, MSD, AFPR, Megasquirt PnP, intercooled with 2" mandrel piping, performance cams, CenterforceStage 3 clutch, fidanza 9lb flywheel, Greddy SP1 Catback exhaust, SEIBON Carbon fiber hood, RX7 FD Rims, Hubert the Parrotlesss ASPEC Retro fitted HID's, and 05 SI Front seats. Daily Driver: 4dr 07 SI...Stock for now.