MX6.com - View Single Post - Crankcase ventilation discussion and sort of survey

**M2cupcar** · 2-6-08, 22:27

Ok - modded and install the intake side vent plate. It's using one cast chamber fin on the cam cover and one chamber fin that's tack welded on the plate itself, plus the fin(s) I added on the end. The stock drain hole is at the rear near the port exit as stock in the bottom of the well.

2-6-08, 22:27	#57 (permalink)
M2cupcar Join Date: Jun 2003 Location: Atlanta, GA, USA iTrader: (1)	Ok - modded and install the intake side vent plate. It's using one cast chamber fin on the cam cover and one chamber fin that's tack welded on the plate itself, plus the fin(s) I added on the end. The stock drain hole is at the rear near the port exit as stock in the bottom of the well.
	\| 1990 Mx-5 \| Silver Red LE interior \| FE DOHC \| T3/T04e 57trim/.50AR Stage3/.48AR \| FM 1.6 LINK ECU with PLink & Palm M500 \| 302rwhp 280ftlbs