Quote:
Originally Posted by MisterPickles
NEW DEVELOPMENT!
It may be a bad wire or the EEC (electronic engine control) is bad. I should be getting 5 volts down the wire to the VSS and I'm only getting 2.8 volts. Maybe it varries between 2.8 and 5 while the wheel is spinning and thats how it measures speed but I'm only guessing. I'm going to give it a go this afternoon and see if I can find either a bad connection or maybe it is just the sensor.
|
As per Michell:
- Disconnect – cable, Disconnect VSS connection. Rotate wheels and measure voltage between sensor terminals.
- If Voltmeter doesn’t fluctuate, replace sensor.
If sensor check ok, they say to check signal going to cluster.