|
g.u.k. - shipped today. I included a second dash bezel (a crappy one) in case you ever want to try custom painting one.
temag - I have a few. How many do you want?
Nonamekid - I have an engine, engine harness ecu harness, ecu, and just about anything else you might need for that swap. If you had a large enough trailer, I would probably just cut the front end off of the car and you take the entire thing. The setup I have is mated to an atx tranny, but you can switch that.
extremesg - quarter glass would come with the moulding still attached although the moulding would have the usual "faded/rough" look to it. Figure $10 plus shipping. As for the trunk lock, do you mean the piece the key goes into or the actual latch that is bolted to the bottom of the trunk with 2 10mm bolts?
|