well i got a sims impreza bumper . it is a close fit but not exact . i am going to explaine what needs to be done for this install. first of the stock bumper and reinforcment bar need to be removed. a new rebar must be fabricated as the stock one is to large. the bumper must also be modified. it needs to be shortend in width by 1.5 inches. the sides must be lengthened by 3.75 inches. these photos show the shortening and lenghtening. please note that this bumper is in no way finished, there is a lot of fiberglassing and sanding still to do to fill the gaps.