high compression f2 in the making

[ademan]

no problem

the block





head

dont mind the paper sticking to the bottom of the head
its a stainless steel valve

[mx_masta]

Pretty nice, though I spy HLA's.

[ademan]

Originally Posted by mx_masta

Pretty nice, though I spy HLA's.

yes, thats the old rocker hla that was dropped off at the machine shop with the head. i will post pic soon of the new lifter setup on the rocker, maybe tomorrow. better clearer pic

[dubgtr]

Originally Posted by ademan

yes, thats the old rocker hla that was dropped off at the machine shop with the head. i will post pic soon of the new lifter setup on the rocker, maybe tomorrow. better clearer pic

^^+1 to that. Pictures of head please

[blackedout]

whats up with some part numbers for those wiesco's i need a set asap can anyone help me out an pm me them thank you

[ademan]

Originally Posted by blackedout

whats up with some part numbers for those wiesco's i need a set asap can anyone help me out an pm me them thank you

they have made 5 set of piston in the last 6 month. call their sales department and tell them you need a piston set for mazda 2.2 engine...its easy. if you did that already, you wont be needing part#. they have made the piston in 86mm,86.5mm and 87mm.

[blackedout]

noob question what size are the pistons now if its bored .020 over ?

[ademan]

Originally Posted by blackedout

noob question what size are the pistons now if its bored .020 over ?

.020=.5mm, so you now have 86.5mm

[blackedout]

Originally Posted by ademan

.020=.5mm, so you now have 86.5mm

thanks man ima give them a call monday see what they will charge me for a set need my car back on the road

[Zach]

I have a set of 020 over pistons collecting dust if you're interested.

[blackedout]

if they are stock im not interested

[ademan]

Originally Posted by Zach

I have a set of 020 over pistons collecting dust if you're interested.

Originally Posted by blackedout

if they are stock im not interested

you guys pm each other or take it to forsale thread. this is my built thread. though im slacking, still got a lot of pic to load and dyno.

[blackedout]

yup back to topic

[90probef2t]

Originally Posted by ademan

you guys pm each other or take it to forsale thread. This is my built thread. Though im slacking, still got a lot of pic to load and dyno.

chop chop son!!!!!!!!!!!

[ademan]

Originally Posted by ademan

9.5-1 compression piston arrived, dish is -14 compare to 8.5-1



8.5 vs 9.5... dish is almost flat on 9.5-1 piston

ok blackout. the part# ASC-04635 is for the 9.5-1 compression. it doesnt matter, just give it to them and tell them you want this in 8.5-1