MX6.com - View Single Post

**doorslammer** · 4-28-08, 13:31

Clearing ABS codes is not the same as clearing engine codes.

Short TAB & GND, Ignition on, then press brake pedal 10 times within ten seconds.

That should clear the ABS codes, providing there is no fault.

4-28-08, 13:31	#7 (permalink)
doorslammer Join Date: May 2004 Location: Stockport, UK iTrader: (1)	Clearing ABS codes is not the same as clearing engine codes. Short TAB & GND, Ignition on, then press brake pedal 10 times within ten seconds. That should clear the ABS codes, providing there is no fault.
	Dave