|
If I would have known there was this much interest in my kit on here I would have logged in sooner...lol The kit your talking about is my baby guys, been in the probe mx6 game for well over ten years, owned 3 first gens, and 6 second gens. I am a member on here, but almost NEVER log in here,mostly on PT, but Nate V8 told me he spread the word over here so i figured I better check it out. If you guys have ANY questions about my kit, post them here and you'll get the answer from the source. The one thing i noticed is some of you seemed concerned about fan clearance on the 6. Lets put it this way...with the kit installed on my PGT, the distance from the side of the blower and the center fan shroud (on the thicker fan) is right at 4 inches clearance. So i forsee no issues with the 6. You may not have that much when installed on your 6, but it WILL fit. I warranty these kits for one full year also, thats how confident I am in my work and my machine shops' work. IF however for some unGodly reason, the fan issue was a hair too tight, or you didnt want the blower housing that close to your fan, you would have two options. get a single slimline (which run around 40 on the bay) and wire it to both the high and low relays, or flip flop your fan assembly from left to right (sounds weird but very simple and costs nothing). Any more questions, comments let me know guys, I'll keep checking back in here. Thanks for the interest!
|