MX6.com - View Single Post

**Oddball** · 5-9-08, 18:35

Check the connection first bud, single wire, grey connector and this should be located connected to the bottom of the throttle body.

The knock sensor itself is located in the middle of the V between each bank, and will require the removal of the inlet manifold and water pipes.

Paul.

5-9-08, 18:35	#4 (permalink)
Oddball Join Date: Jun 2003 Location: kent, UK Age: 40 iTrader: (3)	Check the connection first bud, single wire, grey connector and this should be located connected to the bottom of the throttle body. The knock sensor itself is located in the middle of the V between each bank, and will require the removal of the inlet manifold and water pipes. Paul.
	92 2nd gen HYBRID - ZE cams, ZE inlet manifold, ZE ECU, JE50 VAF, port matched outlaw inlet spacers Mag 8.5 leads, 65mm TB, CAI Tokico shocks springs, SS Auto headers, SS DE-cat, SS Scorpion cat back, 17in Wolfrace Osaka alloys My Album