260hp and 285tq this is with the addition of a top mount I/C vs. 240hp and 258tq with out it. You read the thread and you will see what my car has. If you want a video of me going down the track i will provide that as well. My best before the intercooler was a
13.4@100 with a 1.71 60ft and i only made 3 passes with that set up. Now when i hopefully go saturday for the impost shootout at MIR saturday i am trying for the 12's.
Here is the dyno plot thread you asked about!!
Dyno comparisons - modded vs. stock - Mazda6 / Atenza
I did not get a video for the Z races as it was a spur of the moment race. When i get to the track this saturday i hope to have someone video tape it for me. You want to bring your talon come on!! I know you are NOT talking about that 6s
I am not one to call anyone out to race as i can have my AZZ handed to me anyday but i don't like when someone calls me out.
If you want to have a race and IF you beat me with one of those that are listed then i will pay for your gas here and back!!! I hvae been a long time member on this forum and probetalk and i have no time to lie about anything that i have done. There is no point...
Video coming....
YouTube - Ademan 11psi vs charles modded ms6
13.7@99 first pass with a 1.79 60ft
YouTube - Old School Nova vs MS6
13.4@100 second pass with a 1.71 60ft
i am not sure where the other 2 vids are but they were 2 13.5 passes both with sub 1.80 60fts!!! This was all done without the top mount installed. Anything else you need?