[Jek3]

99.99% sure this is the same kit up on ebay : v6 Turbo pipes / kit. mx-3, 6, probe New Design bb #2 - ProbeTalk.com Forums

Here's the fitment info:

Thermostat housing neck, needs to be shortened a few inches and new lower radiator
hose bend(s) need to be made/routed. Simple trip to you local auto parts store for the hose bends,
and a hack saw, grinder ect, to trim down the neck. imo a simple job.

Pipes require the use of klde obdI exhaust logs.

Hangars are on the opposite side of where they should be, not exactly a problem and they still work.

They have been tested and do Fit, MX-6, MX-3 and of course the Probe.

Probe fit :
Clutch line bent slightly downwards for extra clearance from pipes.

MX-6 fit :
The DP comes into contact with the Fan Shroud(s) . This can be remedied with Slim fans (best option) or you could modify the Shrouds (ehh) .
AC Lines have to be repositioned/bent to accommodate for the Wastegate. Clutch line bent slightly downwards for extra clearance from pipes.

MX-3 fit:
Turbo may come in contact with radiator fill, modification/relocation is required to this part. Clutch line bent slightly downwards for extra clearance from pipes.