MX6.com - View Single Post

**4cylfun** · 5-18-08, 14:19

so for the gauges i founda wire that got pulled from its connector. I went ahead and soldered the power and ground and checked the two taps and wrapped them up. All good, now the door trigger i found out as well with my trusty test light.

this is the wire you want, not the other fatter red and white.

5-18-08, 14:19	#5 (permalink)
4cylfun Join Date: May 2007 Location: Plainfield, IN, USA Age: 26 iTrader: (3)	so for the gauges i founda wire that got pulled from its connector. I went ahead and soldered the power and ground and checked the two taps and wrapped them up. All good, now the door trigger i found out as well with my trusty test light. this is the wire you want, not the other fatter red and white.
	'88 Mazda MX6 LX Manual Tranny '74 Kawasaki S1-C 250 Triple 2 stroke '75 Honda CB360 with a blowd up engine YES, 40 dollars S+H used pistons, cylinders, valves, and another cyl head. I can't wait to see this thing live. I've never once actually seen it run before.