|
Best thing would be to PM people mate.
I've sold to Mazdadude, sethbobob and white-6 so far, although white-6 only got his a few days ago and might not have started installing. I think Lowefx has them installed too, with the leveller.
As for the leveller. Most dont bother, its not on the a-spec loom so it has to be fully wired in and it only adjusts the beam height a small amount. One you have set it, theres no real need to use it after that. The E-spec beam is for a right hand drive car so its set to aim left. Some people have adjusted this but you would have to ask.
The lights I sell come with as much wiring as possible from the donor car (usually about 6 inches per lamp, so they sould be relatively straight forward to install.
The a-spec turns/corners can be used, I'm not sure if theres a lot of difference between the A's and E's on these. I've only sold 1 set with corners so far.
Pm me if you need more help, or do a search for e-spec headlights.
|