MX6.com - View Single Post - What is left to check?? I'm at my witts end

**ls six** · 7-17-08, 20:59

Check the resistance for each injector. The specs should be somewhere in the 1G section.

Has the fuel filter been changed recently? It's worth changing if it hasnt.

Check plugs for correct gap color (light brown/grey) and minimal wear. Check the legnth of each plug wire for internal breaks resistance and signs of arcing through the insulator.

Theres not much you can do with the coil but go ahead and check the resistance there too.

Check the motor/trans mounts.

7-17-08, 20:59	#4 (permalink)
ls six Join Date: Oct 2006 Location: omaha, NE, USA iTrader: (1)	Check the resistance for each injector. The specs should be somewhere in the 1G section. Has the fuel filter been changed recently? It's worth changing if it hasnt. Check plugs for correct gap color (light brown/grey) and minimal wear. Check the legnth of each plug wire for internal breaks resistance and signs of arcing through the insulator. Theres not much you can do with the coil but go ahead and check the resistance there too. Check the motor/trans mounts.
	96 MX-6 full exhaust A/C delete spoiler delete probe wheels and a turbo in the worx. 01 626 brake's98 626 sway bar Altima rear sway bar links.http://www.cardomain.com/ride/2934576 90 pontiac transam. 350 TPI motor new 24# injectors. Rebuilt trans. lots to come.