Lip Kits - Page 6

**shaundizzle** · 12-21-06, 13:15

So I have a '93 MX6, which of the 240 lips do I get...? I think this is the right one... is this correct?

and as for the 2000 Camero RS rear lip... is that the Wings West rear lip? I have to get all this straight so I know what i'm looking for. Does anybody know certain brands, and years for the lips, and what are some key websites to get the 240 lip? I want to buy it RIGHT NOW. Please PM me or suggest somethin! KARMA WILL BE HANDED OUT LIKE GREETINGS AT WALMART!

**ozmojo1** · 12-21-06, 15:15

the camaro rear lip is a stock part. you have to find a junkyard or go to the dealer for one. i hear they are VERY expensive from the dealer so watch out. best bet is to find a person on ebay that sells camaro stuff and ask around.
as for the 240 lip, i would check ebay, much cheaper than online dealers usually.

**MX-six** · 12-21-06, 15:35

For the 240 front lip you have the correct year. So that lip you posted should fit. I was looking at that lip a while ago and only way I would buy it is if it had the Greddy logo on it like the prelude lip made by Greddy.

**mx6ReMiX** · 12-25-06, 3:58

is it true that those 240 lips are direct bolt ons with no mods required ?

**MX-six** · 12-26-06, 11:23

If I remembered correctly. Everything was supposed to fit corectly except the corners of the lip where it curves around the bumper. Just the croners stick out. If you look at Joker's car you will see how they will stick out It actually would flow with the car quite a bit I would think. He has a diff. lip but its for a 240 but it should still fit the same damn near.

**mx6ReMiX** · 12-27-06, 1:10

so basically any of these 240 lips will fit, just the corners will stick out (i'm assuming there's two: the greddy and the oem) ?

also, i was looking around for 240 lips and the cheapest one that i found was the one on projectnissan.com for $160 shipped (i believe)

**msequence** · 12-27-06, 1:41

with the 240 lips they mount from bottom, under of the mx6 bumper.. anything real heavy and too thick will make the mx6 front be soggy and real low to the ground, as opposed to the ace lip I got or the mugen integra front lip where they go over the front of the bumper. Both the ace and the integra require a trim at the edges cuz it sticks out.

I think the coolest mods to the front are to get a stock mx6 bumper and than cut an aftermarket bumper in half horisontaly and just mould the bottom of the aftermarket bumper from another car to the stock mx6. The cleanest and nicest fit ever. Im planning on doing this as my next project, for now my front owns me.. hhe

Mattski

**mx6ReMiX** · 12-27-06, 21:19

Quote:

Originally Posted by msequence

with the 240 lips they mount from bottom, under of the mx6 bumper.. anything real heavy and too thick will make the mx6 front be soggy and real low to the ground, as opposed to the ace lip I got or the mugen integra front lip where they go over the front of the bumper. Both the ace and the integra require a trim at the edges cuz it sticks out.

Mattski

i like the 240 greddy front lip and the jspec integra front lip, but i've read that the integra lips need to be cut and bondoed / FG'd down the middle because they are too wide and i don't have the tools and experience to do this kind of work.

**msequence** · 12-28-06, 14:23

Quote:

Originally Posted by mx6ReMiX

i like the 240 greddy front lip and the jspec integra front lip, but i've read that the integra lips need to be cut and bondoed / FG'd down the middle because they are too wide and i don't have the tools and experience to do this kind of work.

Not the ACE lip or the mugen lip.. the integra u are thinking is the type r lip from the USDM integra.

**Ruubstr94Ls** · 1-9-07, 14:19

You can go to www.car-part.com for junkyard places to find parts in the US.

**H_Type** · 1-27-07, 14:00

I just got my 2000 Rs rear lip!!

I had to order it from Washington so it cost 110 bucks to ship over the boarder. and they charged mee 300 usa for it... so.. for 500 bucks canadian that lip is mine!
im going to molded to my new stock bumper I got from Renboy. Pics soon!!

LittleRedMX6 · 9-26-07, 21:45

I would like to know if there are any CF lip kits and where I could get one? Do you think that CF lip would look good on a red mx6??
Thanks, the newbie

**mx6ReMiX** · 9-26-07, 23:59

Quote:

Originally Posted by LittleRedMX6

I would like to know if there are any CF lip kits and where I could get one? Do you think that CF lip would look good on a red mx6??
Thanks, the newbie

i'm pretty sure that the integra, 240 and other lips made for other cars are made in CF and you can always get one made but as far as a lip kit, i've never seen one for an MX6 (other than the MS lip/skirts). There are some pics floating around here that have a black lip on red 6's.

**BTPilot** · 4-12-08, 21:11

can sumeone post the names of the skirts that are shown on the first page? the ones on the blue mx6 w/nissan front lip and the ones that are on the gunmetal six wit the halo headlights are ones im particularily interested in. im looking for diff options since the lude mugen ones are way too expensive and cant be found in nehtin other than f/g. id prefer urethane if possible.. thanks

12-21-06, 15:15	#77 (permalink)
ozmojo1 Join Date: May 2003 Location: Fujisawa, Japan Age: 23 iTrader: (2)	the camaro rear lip is a stock part. you have to find a junkyard or go to the dealer for one. i hear they are VERY expensive from the dealer so watch out. best bet is to find a person on ebay that sells camaro stuff and ask around. as for the 240 lip, i would check ebay, much cheaper than online dealers usually.
	My Car <a href="http://i6.photobucket.com/albums/y204/ozmojo1/DSC00039.jpg">My car</a> http://followrory.blogspot.com/

12-21-06, 15:35	#78 (permalink)
MX-six Join Date: Jun 2005 Location: Medford, OR, USA Age: 19 iTrader: (0)	For the 240 front lip you have the correct year. So that lip you posted should fit. I was looking at that lip a while ago and only way I would buy it is if it had the Greddy logo on it like the prelude lip made by Greddy.
	93 Mazda MX-6 ATX: Short ram intake w/ K&N filter, 2.5" Stainless cat-back w/ Megan Racing Muffler, Painted Angel Eyes, Tint, (2) Pioneer 1000W 12" Subwoofers with 760W Pioneer Amp. My Ride: http://www.cardomain.com/ride/2471462

12-25-06, 3:58	#79 (permalink)
mx6ReMiX Join Date: Oct 2005 Location: Las Vegas, NV, USA iTrader: (0)	is it true that those 240 lips are direct bolt ons with no mods required ?
	going wingless is like "a hot chick with no underwear" -Ryan

12-26-06, 11:23	#80 (permalink)
MX-six Join Date: Jun 2005 Location: Medford, OR, USA Age: 19 iTrader: (0)	If I remembered correctly. Everything was supposed to fit corectly except the corners of the lip where it curves around the bumper. Just the croners stick out. If you look at Joker's car you will see how they will stick out It actually would flow with the car quite a bit I would think. He has a diff. lip but its for a 240 but it should still fit the same damn near.
	93 Mazda MX-6 ATX: Short ram intake w/ K&N filter, 2.5" Stainless cat-back w/ Megan Racing Muffler, Painted Angel Eyes, Tint, (2) Pioneer 1000W 12" Subwoofers with 760W Pioneer Amp. My Ride: http://www.cardomain.com/ride/2471462

12-27-06, 1:10	#81 (permalink)
mx6ReMiX Join Date: Oct 2005 Location: Las Vegas, NV, USA iTrader: (0)	so basically any of these 240 lips will fit, just the corners will stick out (i'm assuming there's two: the greddy and the oem) ? also, i was looking around for 240 lips and the cheapest one that i found was the one on projectnissan.com for $160 shipped (i believe) Last edited by mx6ReMiX : 12-27-06 at 1:10. Reason: misspelled "cheapest"
	going wingless is like "a hot chick with no underwear" -Ryan

12-21-06, 13:15	#76 (permalink)
shaundizzle Join Date: Dec 2004 Location: Juneau, AK, USA Age: 24 iTrader: (0)	So I have a '93 MX6, which of the 240 lips do I get...? I think this is the right one... is this correct? and as for the 2000 Camero RS rear lip... is that the Wings West rear lip? I have to get all this straight so I know what i'm looking for. Does anybody know certain brands, and years for the lips, and what are some key websites to get the 240 lip? I want to buy it RIGHT NOW. Please PM me or suggest somethin! KARMA WILL BE HANDED OUT LIKE GREETINGS AT WALMART!

12-27-06, 1:41	#82 (permalink)
msequence Join Date: Feb 2002 Location: Mississauga iTrader: (0)	with the 240 lips they mount from bottom, under of the mx6 bumper.. anything real heavy and too thick will make the mx6 front be soggy and real low to the ground, as opposed to the ace lip I got or the mugen integra front lip where they go over the front of the bumper. Both the ace and the integra require a trim at the edges cuz it sticks out. I think the coolest mods to the front are to get a stock mx6 bumper and than cut an aftermarket bumper in half horisontaly and just mould the bottom of the aftermarket bumper from another car to the stock mx6. The cleanest and nicest fit ever. Im planning on doing this as my next project, for now my front owns me.. hhe Mattski
	There are those who like hondas, and those who like Mx6's... I like women.. word!!!! Official MX6.com granddaddy... or if you have a pretty girlfriend.. i'll be the suggardaddy

1-9-07, 14:19	#85 (permalink)
Ruubstr94Ls Join Date: Nov 2000 Location: Houston, TX, USA Age: 26 iTrader: (0)	You can go to www.car-part.com for junkyard places to find parts in the US.
	Ruby's Mx6 94 Mx6 LS 2.5L Hunter Green: Get your OWN style!! AIM: Ruubstr94Ls

1-27-07, 14:00	#86 (permalink)
H_Type RCMP Exasperation Club Join Date: Oct 2003 Location: PenCity, Canada iTrader: (0)	I just got my 2000 Rs rear lip!! I had to order it from Washington so it cost 110 bucks to ship over the boarder. and they charged mee 300 usa for it... so.. for 500 bucks canadian that lip is mine! im going to molded to my new stock bumper I got from Renboy. Pics soon!! Last edited by H_Type : 8-2-07 at 21:42. Reason: spulling
	http://www.mx6.com/forums/vbgarage-member-19222.html Tell me what you think, and would look better

9-26-07, 21:45	#87 (permalink)
LittleRedMX6 New Member Join Date: Sep 2007 Location: Orlando, FL, USA Age: 19 iTrader: (0)	I would like to know if there are any CF lip kits and where I could get one? Do you think that CF lip would look good on a red mx6?? Thanks, the newbie

4-12-08, 21:11	#89 (permalink)
BTPilot Join Date: Jun 2007 Location: ON, Canada Age: 20 iTrader: (2)	can sumeone post the names of the skirts that are shown on the first page? the ones on the blue mx6 w/nissan front lip and the ones that are on the gunmetal six wit the halo headlights are ones im particularily interested in. im looking for diff options since the lude mugen ones are way too expensive and cant be found in nehtin other than f/g. id prefer urethane if possible.. thanks
	I hear yuh rice BOOM BOOM, now hear my ZOOM ZOOM... Blew UP DE Blew UP Curved ZE MXseXX in the works... WIDEBAND O2 wanted, Fidanza Wanted, PM PLease!!