Mazdaspeed Mx6 Guide w/ pictures

**Chefsp0t** · 9-27-08, 14:16

The goal of this thread is to make a thread listing the different Mazdaspeed parts that were available for the Mx6 with multiple pictures of everything (if possible).

IF YOU HAVE BETTER PICTURES OR NEW INFORMATION, PLEASE POST THEM HERE AND I WILL EDIT THE THREAD TO INCORPORATE EVERYTHING If you add pictures that I feel better illustrate the part(s) in question, I will copy them to my Photobucket and link it from there so that, as long as my Photobucket exists, the images in the thread will work.

Interesting note: "since Mazdaspeed items were a hot copy item in the 90's, if all it has is a sticker, it's likely a taiwanese or chinese copy. There's a small chance MS removed the FG stamping in later years/runs of certain items but this is unconfirmed. Mazdaspeed sides, lip, wing, rims, exhaust, etc. should all have hard stamping. On the body parts, this would be a raised lettering emboss. The wing had a reverse emboss. The rims have it stamped on the inside lip, with a reverse emboss on the hub side of the rim as well. The exhaust has it etched." ~Goatcrapp

NOTE: The rear pieces on the silver Mx6 are NOT Mazdaspeed pieces. The kit only offered a front lip, side skirts, and a spoiler.
For more info on those pieces, go HERE (Found the Answer to Mysterious Rear Skirts on the Mazdaspeed Mx6!!)

Mazdaspeed front lip

Mazdaspeed side skirts

Mazdaspeed spoiler

Mazdaspeed reflector

Mazdaspeed wheels

Mazdaspeed muffler (??)

Mazdaspeed airbox (??)
"there was a mazdaspeed airbox available... but i've never seen anyone here with it...it was an inline filter sort of like that, with a slightly different looking inlet up front. It ran full width of the hood, and required cutting of the half rubber section on the hood (to a full length section cut out) - there was also no box, nor resonator. I've seen exactly one picture of this years ago and actually think it's a great design. There were no pics of stampings or anything like that so i can't speak about that." ~Goatcrapp

Random different Mazdaspeed pictures. Some are JDM Mazdaspeed originals and some are USDM and ESPEC models with different Mazdaspeed parts added.

**JLCustomizing** · 9-27-08, 22:55

here is the exhaust plate, i have a few more pictures hiding around in some of my other posts.

**PaulG** · 9-28-08, 10:47

I think there are mazdaspeed struts too for the mx6...green in color iirc.

**ragincanadian4** · 10-1-08, 11:12

Quote:

Originally Posted by PaulG

I think there are mazdaspeed struts too for the mx6...green in color iirc.

Yup, Corksport used to carry them, I almost bought them, they also carried a Mazdaspeed clutch.'

Edit: looking on Corksport, they carry a Mazdaspeed engine mount kit, no pic though.

**Chefsp0t** · 10-1-08, 22:36

I remember seeing pictures of those. I thought about getting MS motor mounts but they're too damn expensive and there are good alternatives anyway.

If they offered a MS trans. with a welded diff and upgraded/stronger gears I would buy one.

**Lambera** · 10-7-08, 16:00

Yup you can see them in the picture above.

Quote:

Originally Posted by PaulG

I think there are mazdaspeed struts too for the mx6...green in color iirc.

Quote:

Originally Posted by ragincanadian4

Yup, Corksport used to carry them, I almost bought them, they also carried a Mazdaspeed clutch.'

Edit: looking on Corksport, they carry a Mazdaspeed engine mount kit, no pic though.

**Lambera** · 10-10-08, 0:01

up close not mounted of course:

**bkdog411** · 10-15-08, 3:23

Just dropped by to add to this thread.
Here are a few pictures of the Mazdaspeed struts

And a couple to show the difference between the stock and the MS struts

interesting they were produced by eibach.

Oh and almost forgot.
the sound of the Mazdaspeed exhaust.
here
just download to listen (worth it imho)

Hope this helps

**Lambera** · 10-15-08, 18:28

Do you have the struts on your car?

**ragincanadian4** · 10-15-08, 19:12

That last pic of the Eibach box says "Sports Spring Kit" It's probably springs in there.

**A Simple MX6** · 10-16-08, 0:43

Audio not working for me...

Looks like it could be more than just springs though on the box, if it's everything standing out in red in the picture.

thingsthatfly2 · 10-21-08, 13:24

dude... forget the rest i just want the struts.

and mby that trunk lip spoiler.

**A Simple MX6** · 10-21-08, 14:55

Quote:

Originally Posted by thingsthatfly2

dude... forget the rest i just want the struts.

and mby that trunk lip spoiler.

I'd like to know how well they performed before I'd want them.

I do believe the lip spoiler isn't the MS one though, just a standard Mazda OE accessory, that for some reason didn't really make it on many, if any at all off the lines.

I just wonder why most of the MS 6's I ever see for sale online are the 2.0l V6 of all engines... Anyone got any information/reason to this?

**thefallenangel1** · 10-28-08, 10:42

Lotsa pics of my car in there

Lookin' good !

**Chefsp0t** · 10-28-08, 11:04

Quote:

Originally Posted by thefallenangel1

Lotsa pics of my car in there

Lookin' good !

Have you done anything to it since you bought it from Heather?

9-27-08, 14:16	#1 (permalink)
Chefsp0t I carry the Ban-Pan. Join Date: Oct 2002 Location: near Philly, PA, USA Age: 24 iTrader: (2)	Mazdaspeed Mx6 Guide w/ pictures The goal of this thread is to make a thread listing the different Mazdaspeed parts that were available for the Mx6 with multiple pictures of everything (if possible). IF YOU HAVE BETTER PICTURES OR NEW INFORMATION, PLEASE POST THEM HERE AND I WILL EDIT THE THREAD TO INCORPORATE EVERYTHING If you add pictures that I feel better illustrate the part(s) in question, I will copy them to my Photobucket and link it from there so that, as long as my Photobucket exists, the images in the thread will work. Interesting note: "since Mazdaspeed items were a hot copy item in the 90's, if all it has is a sticker, it's likely a taiwanese or chinese copy. There's a small chance MS removed the FG stamping in later years/runs of certain items but this is unconfirmed. Mazdaspeed sides, lip, wing, rims, exhaust, etc. should all have hard stamping. On the body parts, this would be a raised lettering emboss. The wing had a reverse emboss. The rims have it stamped on the inside lip, with a reverse emboss on the hub side of the rim as well. The exhaust has it etched." ~Goatcrapp NOTE: The rear pieces on the silver Mx6 are NOT Mazdaspeed pieces. The kit only offered a front lip, side skirts, and a spoiler. For more info on those pieces, go HERE (Found the Answer to Mysterious Rear Skirts on the Mazdaspeed Mx6!!) Mazdaspeed front lip Mazdaspeed side skirts Mazdaspeed spoiler Mazdaspeed reflector Mazdaspeed wheels Mazdaspeed muffler (??) Mazdaspeed airbox (??) "there was a mazdaspeed airbox available... but i've never seen anyone here with it...it was an inline filter sort of like that, with a slightly different looking inlet up front. It ran full width of the hood, and required cutting of the half rubber section on the hood (to a full length section cut out) - there was also no box, nor resonator. I've seen exactly one picture of this years ago and actually think it's a great design. There were no pics of stampings or anything like that so i can't speak about that." ~Goatcrapp Random different Mazdaspeed pictures. Some are JDM Mazdaspeed originals and some are USDM and ESPEC models with different Mazdaspeed parts added. Last edited by Chefsp0t : 12-3-08 at 21:37.
	My car is going to be the bastard love child of a JDM, ESPEC, and USDM Mx6 threesome. It's getting there. Garage Cardomain

9-27-08, 22:55	#2 (permalink)
JLCustomizing Join Date: Nov 2006 Location: North Iowa, IA, USA Age: 22 iTrader: (0)	here is the exhaust plate, i have a few more pictures hiding around in some of my other posts.
	95 MX6 2.0-PRM CAI, NGK Iridium Plugs, Candy Purple Valve Cover, Mazdaspeed 1.3 Bar Radiator Cap, 7" Dual Flip Out TV, Reverse Glow Gauges, Short Shifter, Greddy Weighted Shift Knob, Black Supra Style Taillights, Halo Headlights, 12000k HID Headlights. www.cardomain.com/id/street_rcr88

9-28-08, 10:47	#3 (permalink)
PaulG Join Date: May 2004 Location: Ottawa, Canada Age: 33 iTrader: (1)	I think there are mazdaspeed struts too for the mx6...green in color iirc.
	1997 MX-6 LS

10-1-08, 22:36	#5 (permalink)
Chefsp0t I carry the Ban-Pan. Join Date: Oct 2002 Location: near Philly, PA, USA Age: 24 iTrader: (2)	I remember seeing pictures of those. I thought about getting MS motor mounts but they're too damn expensive and there are good alternatives anyway. If they offered a MS trans. with a welded diff and upgraded/stronger gears I would buy one.
	My car is going to be the bastard love child of a JDM, ESPEC, and USDM Mx6 threesome. It's getting there. Garage Cardomain

10-15-08, 3:23	#8 (permalink)
bkdog411 Join Date: Mar 2006 Location: Dallas,Ames,Omaha, TX, USA Age: 20 iTrader: (0)	Just dropped by to add to this thread. Here are a few pictures of the Mazdaspeed struts And a couple to show the difference between the stock and the MS struts interesting they were produced by eibach. Oh and almost forgot. the sound of the Mazdaspeed exhaust. here just download to listen (worth it imho) Hope this helps Last edited by bkdog411 : 10-15-08 at 3:38.
	Nassau Blue Mx6 LSZE 5-speed. Black leather interior, JDM Eunos KLZE, Exedy Stage III racing clutch, Headers, Magnaflow exhaust (w hollow cat), True Cold air intake.

10-10-08, 0:01	#7 (permalink)
Lambera Join Date: May 2004 Location: Mike Litoris iTrader: (5)	up close not mounted of course:

10-15-08, 18:28	#9 (permalink)
Lambera Join Date: May 2004 Location: Mike Litoris iTrader: (5)	Do you have the struts on your car?

10-16-08, 0:43	#11 (permalink)
A Simple MX6 Join Date: Jun 2007 Location: Richmond, VA, USA Age: 17 iTrader: (1)	Audio not working for me... Looks like it could be more than just springs though on the box, if it's everything standing out in red in the picture.

10-21-08, 13:24	#12 (permalink)
thingsthatfly2 Join Date: Jun 2008 Location: conway, SC, USA Age: 19 iTrader: (0)	dude... forget the rest i just want the struts. and mby that trunk lip spoiler.
	4 THE HATERZ http://www.mx6.com/forums/gallery/21...g-project.html ^the "latest" build... lol updates daily!

10-28-08, 10:42	#14 (permalink)
thefallenangel1 Join Date: Apr 2004 Location: , IN, USA Age: 30 iTrader: (3)	Lotsa pics of my car in there Lookin' good !
	~~ Virtu of Velocity ~~ vir·tu-1. A knowledge or love of for fine objects of art. 2. a work of art of some value.//ve·loc·i·ty-1.Speed of motion; swiftness *The Virtues These angels bestow blessings, usually in the form of miracles. They are associated with heroes and instill courage, and are known as "The Brilliant or Shining Ones." Among the leaders is said to have been Satanel (before his fall). Check out the New Forum For: Indy Mazda Owners Club