Exhaust Clips - Page 5

**AAlonzo** · 9-21-05, 22:58

Quote:

Originally Posted by metros

I just want to know whatkind of setup the guy with the volt exhaust was runnin. I know he had the ze but seems like nobody knows exhaust piping size or if he was usin a resonator.

metros

why dont you just ask him urself. his car, and where the discussion errupted (well with me atleast)
http://www.mx6.com/forums/showthread.php?t=129810 (my KLZE)

**metros** · 9-23-05, 16:21

Yeah I tried that. I didn't post in that thread because it's pretty old. I PM'd him but haven't gotten a response. Must not frequent the board a whole lot. If he ever does give me an answer I'll post it here because I'm sure others would like to know as well.

metros

**tytemx6** · 12-3-05, 22:15

http://www.ansaautomotive.com/Silver...ers/index.html
this is the exhaust i have on my car its a ansa silver line its the last muffler on the page u can see my pics of my car on my cardomain in my sig i will try to get sound clips soon i also have a resonated test pipe the one off ebay that is like $10 i think it is well worth the money and it sounds great i payed 286 for a full cat back exhaust with the muffler

**ZE Power MX6** · 12-9-05, 0:31

VRS Custom Cat-Back Exhaust - 2.5" SS Mandrel Bent w/OBX Titanium Muffler, sound clip is before headers and testpipe were install.

Idle
Drive

**tytemx6** · 12-11-05, 19:01

they dont work man

**metros** · 12-13-05, 16:57

Wow just finally got a response from the guy with the volt exhaust of what his setup consisted of. I asked if he had different size piping, resonator size...basically what his whole setup was. Here's his response copied and pasted. Re: Exhaust set up
actually there is nothing else done to the exhaust.. that is the volt muffler i had put on at my uncles meinekee shop down here in toronto.. the rest is all the stock size piping i believe.. some of it has been replaced due to wear but i have never had anything different put on.

Just to add some info to the exhaust sticky.

metros

**gunmetalpgt** · 12-13-05, 17:39

here is my exhaust

klze
hotshot headers, borla cat back, 2.25 inch testpipe, home made cold air intake, 214.4 regrind intake cams

passing in third gear.....the camera car is a 2005 dodge charger rt
http://www.supermotors.org/vehicles/....php?id=265712

passing in second

http://www.supermotors.org/vehicles/....php?id=265710

taking off in second

http://www.supermotors.org/vehicles/....php?id=265711

this one is third and fourth gear

http://www.supermotors.org/vehicles/....php?id=265713

**Chrissmazdamx6** · 12-13-05, 18:16

If anyone lives around Eden NC (northern part of the state near Greensboro and Reidsville) with a video camera or another way to record sound, ill be glad to do it. Im always told that my exhaust sounds awesome, like a Supra, but I dont have a way to record, and im pretty sure that no one has an exhaust setup like mine.

**93htmx6** · 12-20-05, 21:14

here is mine!
http://videos.streetfire.net/player.aspx?fileid=407BE47A-3AD6-49D0-A9FA-4E5A5E56A7C2

necyomancy666 · 1-13-06, 23:51

Don't know if anyone's still interested in this thread or not.

I have a 1995 Mazda 626, V6 2.5L with a Flowmaster 40 series muffler, 2.25" piping. Stock cat and headers, about to be replaced. Sounds wicked, just don't know how to record it.

**ZE Power MX6** · 2-10-06, 22:23

The file that I post didn't work, so I made some new videos and edited them to one clip...

Video

Silo · 3-8-06, 2:14

time to go buy a volt :P

**Chaos311Clarity** · 3-23-06, 19:06

here are my latest vids... nothing special...

http://media.putfile.com/MOV0000223
idle and rev

http://media.putfile.com/MOV000035577
rolling down the driveway... on the gas a bit.

as per request... here are the vids on youtube

http://youtube.com/watch?v=1dnJvq71YXk
driveway style

http://youtube.com/watch?v=mjKtK6qJB5w
rev

**kid_puma** · 4-24-06, 10:40

Quote:

Originally Posted by ZE Power MX6

The file that I post didn't work, so I made some new videos and edited them to one clip...

Video

frigg that vid is sweet dude can you send it to me

i wish i had an

m-edtion

**Adaman** · 4-24-06, 14:59

I'm buying a Volt Stainless Steel 8" X 5" Oval Muffler 3.00" Dual Outlet 2.25" Inlet today and will post pics and sound clips when i get it on my 6.

BTW youu'll love me for this:

http://motors.search.ebay.com/volt_E...Z1QQsofocusZbs

9-23-05, 16:21	#62 (permalink)
metros Anybody else hard? Join Date: Jul 2003 Location: Binghamton,NY/ Ashburn, VA, USA iTrader: (1)	Yeah I tried that. I didn't post in that thread because it's pretty old. I PM'd him but haven't gotten a response. Must not frequent the board a whole lot. If he ever does give me an answer I'll post it here because I'm sure others would like to know as well. metros
	Pearson's New Dad Position Filled. Move along boys.

12-3-05, 22:15	#63 (permalink)
tytemx6 CLEAR-NCE ISSUEZ Join Date: Jun 2005 Location: moro, IL, USA Age: 20 iTrader: (0)	http://www.ansaautomotive.com/Silver...ers/index.html this is the exhaust i have on my car its a ansa silver line its the last muffler on the page u can see my pics of my car on my cardomain in my sig i will try to get sound clips soon i also have a resonated test pipe the one off ebay that is like $10 i think it is well worth the money and it sounds great i payed 286 for a full cat back exhaust with the muffler
	95 mx6 rs black with 18x8 exel ennio custom cold air intake and custom exhaust header back with resonated test pipe and BnM sts drilled slotted brimbo rotors hawk hps pads and new bravox subs and amp http://www.cardomain.com/ride/2056072

12-9-05, 0:31	#64 (permalink)
ZE Power MX6 Join Date: Jul 2002 Location: Chicago Age: 27 iTrader: (9)	VRS Custom Cat-Back Exhaust - 2.5" SS Mandrel Bent w/OBX Titanium Muffler, sound clip is before headers and testpipe were install. Idle Drive
	M-Edition Turbo - Motor build underway 94 RS - The daily Zoom-Zoom

12-11-05, 19:01	#65 (permalink)
tytemx6 CLEAR-NCE ISSUEZ Join Date: Jun 2005 Location: moro, IL, USA Age: 20 iTrader: (0)	they dont work man
	95 mx6 rs black with 18x8 exel ennio custom cold air intake and custom exhaust header back with resonated test pipe and BnM sts drilled slotted brimbo rotors hawk hps pads and new bravox subs and amp http://www.cardomain.com/ride/2056072

12-13-05, 16:57	#66 (permalink)
metros Anybody else hard? Join Date: Jul 2003 Location: Binghamton,NY/ Ashburn, VA, USA iTrader: (1)	Wow just finally got a response from the guy with the volt exhaust of what his setup consisted of. I asked if he had different size piping, resonator size...basically what his whole setup was. Here's his response copied and pasted. Re: Exhaust set up actually there is nothing else done to the exhaust.. that is the volt muffler i had put on at my uncles meinekee shop down here in toronto.. the rest is all the stock size piping i believe.. some of it has been replaced due to wear but i have never had anything different put on. Just to add some info to the exhaust sticky. metros
	Pearson's New Dad Position Filled. Move along boys.

12-13-05, 17:39	#67 (permalink)
gunmetalpgt Join Date: Sep 2003 Location: iTrader: (0)	here is my exhaust klze hotshot headers, borla cat back, 2.25 inch testpipe, home made cold air intake, 214.4 regrind intake cams passing in third gear.....the camera car is a 2005 dodge charger rt http://www.supermotors.org/vehicles/....php?id=265712 passing in second http://www.supermotors.org/vehicles/....php?id=265710 taking off in second http://www.supermotors.org/vehicles/....php?id=265711 this one is third and fourth gear http://www.supermotors.org/vehicles/....php?id=265713

12-13-05, 18:16	#68 (permalink)
Chrissmazdamx6 Join Date: Jan 2003 Location: Phoenix-ish, AZ, USA Age: 24 iTrader: (2)	If anyone lives around Eden NC (northern part of the state near Greensboro and Reidsville) with a video camera or another way to record sound, ill be glad to do it. Im always told that my exhaust sounds awesome, like a Supra, but I dont have a way to record, and im pretty sure that no one has an exhaust setup like mine.
	Chrissmazdamx6 is now ChrissJettaGLI

12-20-05, 21:14	#69 (permalink)
93htmx6 Join Date: Sep 2003 Location: Pittsburgh, PA, USA Age: 22 iTrader: (0)	here is mine! http://videos.streetfire.net/player.aspx?fileid=407BE47A-3AD6-49D0-A9FA-4E5A5E56A7C2

1-13-06, 23:51	#70 (permalink)
necyomancy666 Join Date: Jan 2006 Location: iTrader: (0)	Don't know if anyone's still interested in this thread or not. I have a 1995 Mazda 626, V6 2.5L with a Flowmaster 40 series muffler, 2.25" piping. Stock cat and headers, about to be replaced. Sounds wicked, just don't know how to record it.
necyomancy666 Join Date: Jan 2006 Location: iTrader: (0)

2-10-06, 22:23	#71 (permalink)
ZE Power MX6 Join Date: Jul 2002 Location: Chicago Age: 27 iTrader: (9)	The file that I post didn't work, so I made some new videos and edited them to one clip... Video
	M-Edition Turbo - Motor build underway 94 RS - The daily Zoom-Zoom

3-8-06, 2:14	#72 (permalink)
Silo Join Date: Nov 2005 Location: Vancouver, Canada iTrader: (0)	time to go buy a volt :P

3-23-06, 19:06	#73 (permalink)
Chaos311Clarity Join Date: Sep 2002 Location: , PA, USA Age: 24 iTrader: (1)	here are my latest vids... nothing special... http://media.putfile.com/MOV0000223 idle and rev http://media.putfile.com/MOV000035577 rolling down the driveway... on the gas a bit. as per request... here are the vids on youtube http://youtube.com/watch?v=1dnJvq71YXk driveway style http://youtube.com/watch?v=mjKtK6qJB5w rev
	2005 Subaru WRX STi - Crystal Gray Metallic *Proudly Sponsored By Glimmer Glass Detailing.com* I used to have a really nice mx-6. More JDM than Matt, always.

4-24-06, 14:59	#75 (permalink)
Adaman Join Date: Nov 2004 Location: Oregon City, OR, USA Age: 21 iTrader: (0)	I'm buying a Volt Stainless Steel 8" X 5" Oval Muffler 3.00" Dual Outlet 2.25" Inlet today and will post pics and sound clips when i get it on my 6. BTW youu'll love me for this: http://motors.search.ebay.com/volt_E...Z1QQsofocusZbs Last edited by Adaman : 4-24-06 at 15:05.