Exhaust Clips

**Jason** · 8-25-05, 13:32

I think we should all compile our exhaust clips up into one post, and make it a sticky... So we don't have the "what does this sound like." or "I want to hear something deep."
All these clips were found from searching here, and a few on PT...

SuperflyMx6 was the one with the idea, i'm just posting it up.

Here is Greddy, Borla, and Magnaflow... All with diff types of intake/headers
http://chrono.org/scpoc2.htm#dyno

Here is another clip
http://new.uksiland.com/imagez/ (scroll down to mx6)

Magnaflow Exhaust (Malicious)
http://home.cogeco.ca/~scroswell/june%202%20026.avi

AAlonzo's exhaust
http://www.we-todd-did-racing.com/wetoddimage.wtdr/wNjE0MjgyNnM0MTNkZmQzMXk1NDE%3D

VOLT... By far my favorite!!!
http://home.mchsi.com/~datoay21/100_0007_4.AVI

I'm working on getting a clip of mine up.
Edit*** Here it is...
This is when I had stock piping with a generic Ebay Muffler... I don't have a clip with the same muffler on my 2.5inch custom exhaust.

There really wasn't that much rasp like it sounds on the clip... The recording is from my phone, so yeah...

http://pictures.sprintpcs.com/share...State=RETRIEVED

If anyone else has any clips, throw them up... Maybe this could become a sticky?
Also, any "muffler or exhaust help" Info could go in here also.
Kind of like the Body Kit sticky in Appearance, why not have an exhaust sticky in performance?

Jason

**superflymx6** · 8-25-05, 13:36

i got ONE!!!!

http://mx6.innershell.net/audio.htm

Found this today:

http://forums.probetalk.com/showthread.php?t=1701171740

Another site that sells mufflers, i have found VOLT on there for cheaper than the other site. FREE SHIPPING THey are listed under Arvin Supreme.
http://www.performancepeddler.com/se...=volt&x=5&y=10

**Xzinum** · 8-25-05, 23:26

i can host audio files so they could be hot-linked on here.

**superflymx6** · 8-26-05, 0:44

I have a better idea too but it is kinda like the Dyno sheet thread PT has.

**Jason** · 8-26-05, 1:44

Quote:

Originally Posted by Xzinum

i can host audio files so they could be hot-linked on here.

That sounds like a good idea, just might have to do that.

I want to see if we can get this a sticky before you go through all the work.

**superflymx6** · 8-26-05, 1:57

this could be a great idea if people who have the time and the ability to do so. If people with mx6s or probes would go out and have someone video tape them or ride with them or whatever it takes to get the sound clip. get a friend with a camera or whatever it takes . You like to drive around anyway in your car and show off your exhaust tone, so just let us hear it too.

Then we could have a form to fill out like this:

Car:
Engine:
Cat Back System:
Custom Cat Back:
Headers:
Intake:

and whatever else you want to say about it. we can fix up the form sheet thing.

this would reduce the amount of "what does this sound like" or what is this going to sound like if i add header"

They are good questions if you are worried about that stuff and I know alot of people are. I am one of those people.

Also, this would be kinda like the PT dyno sheet thread, were if you have a question or something you dont post it in the thread. if you have a question IM the person or send a private message using the private message system on mx6.com.

Thanks

**Jason** · 8-26-05, 2:08

I think that's an awesome Idea!!

That way people could get an idea on what the exhaust sounds like and such.

We could also lists prices and links to where to buy each setup...
This is just like the body kit thread in appearance, but only with exhaust in performance!!

**superflymx6** · 8-26-05, 2:26

49 views, hmmm. What do you guys and girls think about the idea. Feel free to add to the idea that has already started. Dont be shy!!

One more thing. maybe some how we could have pictures of the setup. Somepeople like to see that too.

**MX6_VTECH** · 8-26-05, 2:59

ask Rubb maybe she'll let ya

ProMeX6 · 8-26-05, 9:47

i think the clipping of exhaust tones is a great idea, i am planning to customize mine, and from these clips i can sort of figure out what i want and need, i think other newbies would also appreaciate this.laters

**RevZempoe** · 8-26-05, 10:19

I think instead of clipping it and labelling by the user, why not label it by which exhaust, then user? I know a lot of people inquire about what exhausts sound like so it would be an informative thread as well

**AAlonzo** · 8-26-05, 10:54

hey! mine doesnt count! lol. That was back when my stock exhaust was ready to fall off
I dont know where else to host my other clips, but I have a magnaflow for the v6

**superflymx6** · 8-26-05, 12:37

Well the reason behind labeling it by user is a good idea but we can looking into another way too. But I was just going off of what PT did with the dyno sheet thread they did. I have found it to have alot of good information in a readable style of post, meaning you have labels telling you what they have done to their car and how much hp and whatnot that they have.

Yea we could if we have a place to host the clips or vids, we could have a link on there that would break it down into stock, borla, pacesetter, brosal, custom, ect...but also have the post on here detailing what they did to their exhaust so there are no questions.

People would have to state weather they are using a cat or a testpipe, 2in, 2.25in, 2.5in, ect.. pipe size, mandrel bend of crush bent pipe, post a link to the muffler they used or the catback system they bought. Also if you are running a resonator, and what length it is. Also I have heard that headers make a lot of differece in the sound of the car as well as performance, so its a good idea to state which kind you have and state if they fit well when they were installed. Also what kind of engine do you have in your car. Thats about all I can think of right off the top of my head.

IMPORTANT NOTE: I have given this some more thought and this thread should contain all the information about exhaust. You can ask questions and asnwer them here in the thread. That is a better idea since all the information will be centered here.

We could also add in headers into this thread if it becomes a sticky, since I just went and looked and saw alot of post about headers.

I hope this works out, it is a great idea!!

**Jason** · 8-26-05, 13:20

Rev has a good idea... Label the type of exhaust, then the User!

I'll ask Ruub.

**Xzinum** · 8-26-05, 23:01

now that we have our sticky, anyone who needs a host for their clips, Pm me or email them to XtotheZ at Gmail dot com

8-25-05, 13:32	#1 (permalink)
Jason I'm Still Here! Join Date: Apr 2004 Location: Idahooooooo, USA Age: 21 iTrader: (0)	Exhaust Info and Sound Clips I think we should all compile our exhaust clips up into one post, and make it a sticky... So we don't have the "what does this sound like." or "I want to hear something deep." All these clips were found from searching here, and a few on PT... SuperflyMx6 was the one with the idea, i'm just posting it up. Here is Greddy, Borla, and Magnaflow... All with diff types of intake/headers http://chrono.org/scpoc2.htm#dyno Here is another clip http://new.uksiland.com/imagez/ (scroll down to mx6) Magnaflow Exhaust (Malicious) http://home.cogeco.ca/~scroswell/june%202%20026.avi AAlonzo's exhaust http://www.we-todd-did-racing.com/wetoddimage.wtdr/wNjE0MjgyNnM0MTNkZmQzMXk1NDE%3D VOLT... By far my favorite!!! http://home.mchsi.com/~datoay21/100_0007_4.AVI I'm working on getting a clip of mine up. Edit*** Here it is... This is when I had stock piping with a generic Ebay Muffler... I don't have a clip with the same muffler on my 2.5inch custom exhaust. There really wasn't that much rasp like it sounds on the clip... The recording is from my phone, so yeah... http://pictures.sprintpcs.com/share...State=RETRIEVED If anyone else has any clips, throw them up... Maybe this could become a sticky? Also, any "muffler or exhaust help" Info could go in here also. Kind of like the Body Kit sticky in Appearance, why not have an exhaust sticky in performance? Jason Last edited by Jason : 9-30-05 at 1:43.
	03 Nissan Sentra SE-R Spec V (I/H/E) Red Rocket! 1994 Mazda (show) Mx6 LS MTX (Parked) 1995 Mazda (sLow) Mx6 RS ATX (Sold)

8-25-05, 13:36	#2 (permalink)
superflymx6 Join Date: Sep 2000 Location: Raleigh, NC, USA Age: 27 iTrader: (0)	i got ONE!!!! http://mx6.innershell.net/audio.htm Found this today: http://forums.probetalk.com/showthread.php?t=1701171740 Another site that sells mufflers, i have found VOLT on there for cheaper than the other site. FREE SHIPPING THey are listed under Arvin Supreme. http://www.performancepeddler.com/se...=volt&x=5&y=10 Last edited by superflymx6 : 9-18-05 at 18:15.
	1994 Mazda MX6 V6 5spd

8-26-05, 0:44	#4 (permalink)
superflymx6 Join Date: Sep 2000 Location: Raleigh, NC, USA Age: 27 iTrader: (0)	I have a better idea too but it is kinda like the Dyno sheet thread PT has.
	1994 Mazda MX6 V6 5spd

8-26-05, 1:57	#6 (permalink)
superflymx6 Join Date: Sep 2000 Location: Raleigh, NC, USA Age: 27 iTrader: (0)	this could be a great idea if people who have the time and the ability to do so. If people with mx6s or probes would go out and have someone video tape them or ride with them or whatever it takes to get the sound clip. get a friend with a camera or whatever it takes . You like to drive around anyway in your car and show off your exhaust tone, so just let us hear it too. Then we could have a form to fill out like this: Car: Engine: Cat Back System: Custom Cat Back: Headers: Intake: and whatever else you want to say about it. we can fix up the form sheet thing. this would reduce the amount of "what does this sound like" or what is this going to sound like if i add header" They are good questions if you are worried about that stuff and I know alot of people are. I am one of those people. Also, this would be kinda like the PT dyno sheet thread, were if you have a question or something you dont post it in the thread. if you have a question IM the person or send a private message using the private message system on mx6.com. Thanks Last edited by superflymx6 : 8-26-05 at 2:02.
	1994 Mazda MX6 V6 5spd

8-26-05, 2:08	#7 (permalink)
Jason I'm Still Here! Join Date: Apr 2004 Location: Idahooooooo, USA Age: 21 iTrader: (0)	I think that's an awesome Idea!! That way people could get an idea on what the exhaust sounds like and such. We could also lists prices and links to where to buy each setup... This is just like the body kit thread in appearance, but only with exhaust in performance!!
	03 Nissan Sentra SE-R Spec V (I/H/E) Red Rocket! 1994 Mazda (show) Mx6 LS MTX (Parked) 1995 Mazda (sLow) Mx6 RS ATX (Sold)

8-25-05, 23:26	#3 (permalink)
Xzinum Wait,...wha? Join Date: Jun 2002 Location: Kingston, On, Canuckistan Age: 25 iTrader: (0)	i can host audio files so they could be hot-linked on here.

8-26-05, 2:26	#8 (permalink)
superflymx6 Join Date: Sep 2000 Location: Raleigh, NC, USA Age: 27 iTrader: (0)	49 views, hmmm. What do you guys and girls think about the idea. Feel free to add to the idea that has already started. Dont be shy!! One more thing. maybe some how we could have pictures of the setup. Somepeople like to see that too.
	1994 Mazda MX6 V6 5spd

8-26-05, 2:59	#9 (permalink)
MX6_VTECH Join Date: Jul 2003 Location: Lancaster, PA, USA Age: 23 iTrader: (0)	ask Rubb maybe she'll let ya
	Matt Wiley Designs 1998 Mitsubishi Eclipse Spyder Pic

8-26-05, 9:47	#10 (permalink)
ProMeX6 Join Date: Aug 2005 Location: houston, TX, USA Age: 24 iTrader: (0)	i think the clipping of exhaust tones is a great idea, i am planning to customize mine, and from these clips i can sort of figure out what i want and need, i think other newbies would also appreaciate this.laters

8-26-05, 10:19	#11 (permalink)
RevZempoe Join Date: Apr 2005 Location: Richmond, VA, USA Age: 25 iTrader: (0)	I think instead of clipping it and labelling by the user, why not label it by which exhaust, then user? I know a lot of people inquire about what exhausts sound like so it would be an informative thread as well
	My ride: http://www.mx6.com/forums/showthread.php?t=129743 CAI, MMI headers, ZE Intake Manifold, Thermo Spacers, Protege Caliper Swap

8-26-05, 10:54	#12 (permalink)
AAlonzo Join Date: May 2004 Location: North of Mass, MA, USA Age: 22 iTrader: (0)	hey! mine doesnt count! lol. That was back when my stock exhaust was ready to fall off I dont know where else to host my other clips, but I have a magnaflow for the v6
	Last night I dreamed I was a muffler... needless to say I woke up exhausted.

8-26-05, 12:37	#13 (permalink)
superflymx6 Join Date: Sep 2000 Location: Raleigh, NC, USA Age: 27 iTrader: (0)	Well the reason behind labeling it by user is a good idea but we can looking into another way too. But I was just going off of what PT did with the dyno sheet thread they did. I have found it to have alot of good information in a readable style of post, meaning you have labels telling you what they have done to their car and how much hp and whatnot that they have. Yea we could if we have a place to host the clips or vids, we could have a link on there that would break it down into stock, borla, pacesetter, brosal, custom, ect...but also have the post on here detailing what they did to their exhaust so there are no questions. People would have to state weather they are using a cat or a testpipe, 2in, 2.25in, 2.5in, ect.. pipe size, mandrel bend of crush bent pipe, post a link to the muffler they used or the catback system they bought. Also if you are running a resonator, and what length it is. Also I have heard that headers make a lot of differece in the sound of the car as well as performance, so its a good idea to state which kind you have and state if they fit well when they were installed. Also what kind of engine do you have in your car. Thats about all I can think of right off the top of my head. IMPORTANT NOTE: I have given this some more thought and this thread should contain all the information about exhaust. You can ask questions and asnwer them here in the thread. That is a better idea since all the information will be centered here. We could also add in headers into this thread if it becomes a sticky, since I just went and looked and saw alot of post about headers. I hope this works out, it is a great idea!! Last edited by superflymx6 : 8-26-05 at 12:56. Reason: thought of something else
	1994 Mazda MX6 V6 5spd

8-26-05, 13:20	#14 (permalink)
Jason I'm Still Here! Join Date: Apr 2004 Location: Idahooooooo, USA Age: 21 iTrader: (0)	Rev has a good idea... Label the type of exhaust, then the User! I'll ask Ruub.
	03 Nissan Sentra SE-R Spec V (I/H/E) Red Rocket! 1994 Mazda (show) Mx6 LS MTX (Parked) 1995 Mazda (sLow) Mx6 RS ATX (Sold)

8-26-05, 23:01	#15 (permalink)
Xzinum Wait,...wha? Join Date: Jun 2002 Location: Kingston, On, Canuckistan Age: 25 iTrader: (0)	now that we have our sticky, anyone who needs a host for their clips, Pm me or email them to XtotheZ at Gmail dot com