klze motor help

polaris800 · 8-6-08, 16:13

K so i bought a 95 mx6 ls leather sun roof everything for 400$ except it had a blown motor and trans so i went on ebay and bouht a klze hearing that there better and knowing only that i bought a curved neck will this motor still go in my car? i have a 5 speed trans???

**SoloTimeMX6** · 8-6-08, 19:35

I am under the impression it does fit. I believe i there is threads on probetalk about this subject.
I would check your numbers very carefully. I ordered a curved neck and they sent me a gunked up milenia engine. Also do plenty of research on this before the swap it will be your greatest help. its not hard just take your time. Goodluck have fun.

**mm2587** · 8-7-08, 13:09

I can't remember if a curved neck manifold will clear the hood. But if it doesn't just swap over the manifold from the blown engine. Everything else is a direct bolton

**scubasteve_07** · 8-7-08, 14:30

it clears i have on on my car

**sethbobbob** · 8-7-08, 23:19

it will work make sure its a klze though

polaris800 · 8-12-08, 20:31

does anyone have a link to how to make sure its a klze

8-6-08, 16:13	#1 (permalink)
polaris800 Join Date: Jun 2008 Location: Age: 19 iTrader: (0)	klze motor help K so i bought a 95 mx6 ls leather sun roof everything for 400$ except it had a blown motor and trans so i went on ebay and bouht a klze hearing that there better and knowing only that i bought a curved neck will this motor still go in my car? i have a 5 speed trans???

8-7-08, 13:09	#3 (permalink)
mm2587 Join Date: Aug 2003 Location: Pittsburgh, PA, USA Age: 21 iTrader: (1)	I can't remember if a curved neck manifold will clear the hood. But if it doesn't just swap over the manifold from the blown engine. Everything else is a direct bolton
	-Mike I'll bet no one even noticed I as gone... !!Stainless Steel Adjustable Endlinks!! ::I posted in the best thread Evar!::

8-7-08, 14:30	#4 (permalink)
scubasteve_07 Join Date: Mar 2006 Location: mount vernon, WA, USA Age: 24 iTrader: (0)	it clears i have on on my car
	Boys, I think y'all karma nuked him into bannination. Originally Posted by JamesHat i have a tool worth putting in the finest boxes.

8-7-08, 23:19	#5 (permalink)
sethbobbob Join Date: Mar 2005 Location: Queens, NY, USA Age: 29 iTrader: (0)	it will work make sure its a klze though
	never fear the unknown for it will stay unknown forever.96 klze widebody, to much to list....boost in the works

8-6-08, 19:35	#2 (permalink)
SoloTimeMX6 Join Date: Nov 2003 Location: St. Louis, MO, USA Age: 23 iTrader: (0)	I am under the impression it does fit. I believe i there is threads on probetalk about this subject. I would check your numbers very carefully. I ordered a curved neck and they sent me a gunked up milenia engine. Also do plenty of research on this before the swap it will be your greatest help. its not hard just take your time. Goodluck have fun.

8-12-08, 20:31	#6 (permalink)
polaris800 Join Date: Jun 2008 Location: Age: 19 iTrader: (0)	does anyone have a link to how to make sure its a klze