How to: Test your VRIS. Paper Test.

**cheerios165** · 11-12-03, 18:45

Quick easy way to check if your vris system is working correctly.

step 1. pop the hood
step 2. locate the engine
step 3 locate the vris acutators

**cheerios165** · 11-12-03, 18:47

as shown here

**cheerios165** · 11-12-03, 18:49

place a small piece of paper between the stopper and the vris as shown here

**cheerios165** · 11-12-03, 18:51

and here

**cheerios165** · 11-12-03, 18:55

then go for a drive, drive it hard with lots of wide open throttle (aka floor it). after your done driving pop the hood and see if the papers are still there, if the papers are gone then the vris opened and it passes the test if they are still there then somethings wrong. this is just a preliminary test doesn't narrow the problem down much.

**cheerios165** · 11-15-03, 4:14

i almost forget to add, pictures are courtesy of: Cre3d

11-12-03, 18:45	#1 (permalink)
cheerios165 Join Date: Dec 2002 Location: Portland, OR/Kennewick, WA, USA Age: 22 iTrader: (0)	How to: Test your VRIS. Paper Test. Quick easy way to check if your vris system is working correctly. step 1. pop the hood step 2. locate the engine step 3 locate the vris acutators

11-12-03, 18:55	#5 (permalink)
cheerios165 Join Date: Dec 2002 Location: Portland, OR/Kennewick, WA, USA Age: 22 iTrader: (0)	then go for a drive, drive it hard with lots of wide open throttle (aka floor it). after your done driving pop the hood and see if the papers are still there, if the papers are gone then the vris opened and it passes the test if they are still there then somethings wrong. this is just a preliminary test doesn't narrow the problem down much. Last edited by cheerios165 : 11-25-03 at 20:39.

11-15-03, 4:14	#6 (permalink)
cheerios165 Join Date: Dec 2002 Location: Portland, OR/Kennewick, WA, USA Age: 22 iTrader: (0)	i almost forget to add, pictures are courtesy of: Cre3d