[2Rusty]

Push the retainer clips back on the fuel hoses. I used a pair of soft pliers to gently twist the hoses off the fittings. Be careful! You do not want to damage these hoses. Also be aware that when you do this some fuel will come out and it may still be pressurized. Also remove the eight screws holding the fuel pump assembly down with your philips head. These screws are quite small and if you are not careful they will fall down where they will never see the light of day again. This is why I suggest a magnetized screw driver for the added security. The fuel pump cover does have a gasket on it so a tight seal is important.