Now, down to business. The assembly will have two wiring harnesses on it. One is for the fuel gauge level and the other is for the pump. Do not touch anything having to do with the fuel gauge level. Go ahead and remove the nuts holding the wires to the top of the fuel pump. This is where the small wrenches come in.
Again I do not remember what size but they are different sizes. A pair of pliers can be used as well.
Now take your philips head and remove the screw at the bottom of the assembly which holds the pump in place. This screw wasn't rusty or anything but it gave me a terrible time. I ended up taking some pliers and clamping around the edges. Yes, the screw got a little torn up but by no means was it unusable. It was a better alternative to stripping it with the screw driver. You should now be able to unclip the metal piece holding the pump in place. Go ahead and take the big rubber band off at this time.