MX6.com - View Single Post

**Jbrun64** · 3-10-03, 18:04

unfortunately, i dont have a digital camera, but I am getting one in a month. I can describe it to you. Okay, pop your hood. Top right, against the big hump that holds the strut. There is a bracket that holds a black box. Its maybe 2 by 3 inches. It has some bumps in it. That is the coil. There are 2 wires going to it through the BOTTOM. One is black, and the other is black with a white stripe. Tap the Black wire (negative) for an RPM reading. Also, your spark plug wires. 4 wires go to the spark plugs, and the 5th goes to the coil on the top. Any more questions post here. I still need the speed sensor wire..........

3-10-03, 18:04	#17 (permalink)
Jbrun64 Join Date: Sep 2002 Location: NVA (www.allnva.com) iTrader: (0)	unfortunately, i dont have a digital camera, but I am getting one in a month. I can describe it to you. Okay, pop your hood. Top right, against the big hump that holds the strut. There is a bracket that holds a black box. Its maybe 2 by 3 inches. It has some bumps in it. That is the coil. There are 2 wires going to it through the BOTTOM. One is black, and the other is black with a white stripe. Tap the Black wire (negative) for an RPM reading. Also, your spark plug wires. 4 wires go to the spark plugs, and the 5th goes to the coil on the top. Any more questions post here. I still need the speed sensor wire.......... Last edited by Jbrun64 : 3-10-03 at 21:18.
	http://www.cardomain.com/memberpage/653666 Intake, Exhaust, T-bird, 14 psi, 5th and 6th injector, 2 1/4 hard pipes with silicone, Adam Chip, turbo xs type H bov, fsb/rsb/rtb, ported 02 housing/exhaust manifold,walbro 190 w/ rewire, egt/boost/airfuel,, MSD coil/wires, kill switch, 35/20 tint, brembos w/ pbr, hks type 1, sts, redline fluid, poly mounts, no ac/ps, cupholders 198.9 hp 272.7 tq