Rear rotors?

defiler · 7-22-08, 23:03

Does anyone have a part # for the rear rotors, and possibly bearings? I went to tons of stores today, and all they have are the rear wheel bearings for the 2ws models, and 2ws rotors.

Looking for a non-mazda part #. I have a Federal-Mogul part # for the bearing, but no # for the corresponding rotor.

**Keeloh** · 7-22-08, 23:17

Beck Arnley / Brake Rotor - Rear Part Number: 083-2282

defiler · 7-23-08, 9:02

I did find a Beck-Arneley part #, but the rotors came up as $100 apeice.

**jphillips626** · 7-24-08, 0:05

Ive got a bearing for the rear, beck arnley from dealer i think, let me dig it out. I paid 80 for it.
talk to allmazda about rotors. what is the issue?

defiler · 7-24-08, 9:12

Issue is that the rotors are [fizzle]ed

That and the 2ws rear rotors and bearings are NOT the same. The bearing is much wider and so is the spindle. None of the stores carry the 4ws rotors.

**jphillips626** · 7-24-08, 9:15

autozone special ordred them for me. i have the 4ws bearing

**Rizzo90** · 7-24-08, 9:18

try calling the guys @ rosenthal they are reall helpful finding mazda part #'s ( the same ones you sent me to for the head gasket) 888-450-3220

**Rizzo90** · 7-24-08, 9:24

found the 4ws one for ya!!! Lookie here on this page
1989 MAZDA 626 Rotor - Rear

defiler · 7-24-08, 10:35

Quote:

try calling the guys @ rosenthal they are reall helpful finding mazda part #'s ( the same ones you sent me to for the head gasket) 888-450-3220

I would normally go thru Rosenthal, but they're still more expensive than generico auto zone ones. I woudl special order them from AutoZone, but I dont have the time to go thru the hassle of returning them and ordering new ones if they are the wrong ones (Like the 2 other shops have done so far)

Quote:

autozone special ordred them for me. i have the 4ws bearing

The bearing isnt the problem really. The guy at a local shop was able to take the part # off the old bearing and cross-reference it and find me the correct #. But they cant do so with a rotor.

You have 1 or 2 bearings?

**1FIERCEGT** · 7-30-08, 18:47

Quote:

Originally Posted by defiler

I did find a Beck-Arneley part #, but the rotors came up as $100 apeice.

I highly doubt you're going to find them cheaper than that...I have a link on rotors where I live and still can't touch that price..cheapest I can get it for is $110CDN each so unless it's used I'd snatch it up for $100a piece

**magik8** · 7-30-08, 19:15

I think expecting to get 4WS specific parts (i.e. rear rotors/bearings) cheap is expecting too much. You have a one of a kind car, you're gonna have expensive parts.

**Wibla** · 8-5-08, 20:18

Lemme get this straight, me being less than bright and all...

The calipers are the same anyway, or are they special too? I have a set of 4 calipers for my 626, but if the rears are special, I'm [fizzle]ed...

defiler · 8-5-08, 20:19

They list different part #'s thru Mazda and the parts stores, so I assume they are different also.

**Wibla** · 8-5-08, 20:23

Ok, we need to get that on the "whats different" list then...

defiler · 8-5-08, 20:28

Quote:

Ok, we need to get that on the "whats different" list then...

True. I was almost positive it was on there, but when I check I see its not...

7-22-08, 23:03	#1 (permalink)
defiler Banned Join Date: Aug 2006 Location: Coon Rapids, MN, USA Age: 24 iTrader: (9)	Rear rotors? Does anyone have a part # for the rear rotors, and possibly bearings? I went to tons of stores today, and all they have are the rear wheel bearings for the 2ws models, and 2ws rotors. Looking for a non-mazda part #. I have a Federal-Mogul part # for the bearing, but no # for the corresponding rotor.

7-22-08, 23:17	#2 (permalink)
Keeloh 2.2 i Join Date: May 2007 Location: Los Angeles iTrader: (28)	Beck Arnley / Brake Rotor - Rear Part Number: 083-2282 Last edited by Keeloh : 7-22-08 at 23:35.
	Bone Stock.

7-24-08, 0:05	#4 (permalink)
jphillips626 4WS Freak Join Date: Feb 2004 Location: kalamazoo, MI, USA Age: 24 iTrader: (2)	Ive got a bearing for the rear, beck arnley from dealer i think, let me dig it out. I paid 80 for it. talk to allmazda about rotors. what is the issue?
	Noble White 626 turbo 4WS 5spd. Intake, exhaust, turbo timer =reliable daily driver. http://www.cardomain.com/ride/2525741

7-24-08, 9:15	#6 (permalink)
jphillips626 4WS Freak Join Date: Feb 2004 Location: kalamazoo, MI, USA Age: 24 iTrader: (2)	autozone special ordred them for me. i have the 4ws bearing
	Noble White 626 turbo 4WS 5spd. Intake, exhaust, turbo timer =reliable daily driver. http://www.cardomain.com/ride/2525741

7-24-08, 9:18	#7 (permalink)
Rizzo90 Join Date: Nov 2003 Location: just east of the "LOU", IL, USA iTrader: (4)	try calling the guys @ rosenthal they are reall helpful finding mazda part #'s ( the same ones you sent me to for the head gasket) 888-450-3220
	*resurrection...10/04/2008* '90 pgt.....the usual mods...........ps....I don't ask questions prior to searching Founder of the home for the grammatically challenged.....few pics of my baby!!... http://s212.photobucket.com/albums/c...t=5513cba4.pbw

7-23-08, 9:02	#3 (permalink)
defiler Banned Join Date: Aug 2006 Location: Coon Rapids, MN, USA Age: 24 iTrader: (9)	I did find a Beck-Arneley part #, but the rotors came up as $100 apeice.

7-24-08, 9:12	#5 (permalink)
defiler Banned Join Date: Aug 2006 Location: Coon Rapids, MN, USA Age: 24 iTrader: (9)	Issue is that the rotors are [fizzle]ed That and the 2ws rear rotors and bearings are NOT the same. The bearing is much wider and so is the spindle. None of the stores carry the 4ws rotors.

7-24-08, 9:24	#8 (permalink)
Rizzo90 Join Date: Nov 2003 Location: just east of the "LOU", IL, USA iTrader: (4)	found the 4ws one for ya!!! Lookie here on this page 1989 MAZDA 626 Rotor - Rear
	*resurrection...10/04/2008* '90 pgt.....the usual mods...........ps....I don't ask questions prior to searching Founder of the home for the grammatically challenged.....few pics of my baby!!... http://s212.photobucket.com/albums/c...t=5513cba4.pbw

7-30-08, 19:15	#11 (permalink)
magik8 Join Date: Jan 2001 Location: Wisconsin, USA Age: 26 iTrader: (0)	I think expecting to get 4WS specific parts (i.e. rear rotors/bearings) cheap is expecting too much. You have a one of a kind car, you're gonna have expensive parts.

8-5-08, 20:18	#12 (permalink)
Wibla 4ws newbie Join Date: May 2007 Location: Telemark, Norway Age: 24 iTrader: (0)	Lemme get this straight, me being less than bright and all... The calipers are the same anyway, or are they special too? I have a set of 4 calipers for my 626, but if the rears are special, I'm [fizzle]ed...
	'88 Mazda 626 2.0i-16 4ws

8-5-08, 20:19	#13 (permalink)
defiler Banned Join Date: Aug 2006 Location: Coon Rapids, MN, USA Age: 24 iTrader: (9)	They list different part #'s thru Mazda and the parts stores, so I assume they are different also.

8-5-08, 20:23	#14 (permalink)
Wibla 4ws newbie Join Date: May 2007 Location: Telemark, Norway Age: 24 iTrader: (0)	Ok, we need to get that on the "whats different" list then...
	'88 Mazda 626 2.0i-16 4ws