MX6.com - View Single Post

**Ruubstr94Ls** · 10-13-03, 19:55

BACKGROUND REMOVAL

1. To begin, find the image with an object you would like to stand out by removing the background.

2. Now go to Filter > Extract. Slowly outline the object you would like to remain in the picture. (To get the best result, enlarge the image and change the brush size when working in small areas.) Once done, click on the fill button and click inside the selected area. Then click OK.

3. Most likely your image didn't turn out exactly how you wanted. Using the air brush and eraser tools touch up and remove the excess.

10-13-03, 19:55	#6 (permalink)
Ruubstr94Ls Join Date: Nov 2000 Location: Houston, TX, USA Age: 26 iTrader: (0)	BACKGROUND REMOVAL 1. To begin, find the image with an object you would like to stand out by removing the background. 2. Now go to Filter > Extract. Slowly outline the object you would like to remain in the picture. (To get the best result, enlarge the image and change the brush size when working in small areas.) Once done, click on the fill button and click inside the selected area. Then click OK. 3. Most likely your image didn't turn out exactly how you wanted. Using the air brush and eraser tools touch up and remove the excess. Last edited by Ruubstr94Ls : 4-20-04 at 6:06.