MX6.com - View Single Post

**Panther37** · 11-10-03, 2:53

Next you need to get all the rocker arm on the bars in the right order. Did the numbers wear off? That's okay. I'll tell you the correct order. If you noticed in the picture of the three numbered rocker arms, numbers 1 and 3 have a notch on the side and number 2 doesn't. Arms with a notch are considered "notched" and arms without a notch are considered "smooth." The first bar is for the intake and toward the back of the car. The second bar is for the exhaust and is toward the front of the car. When putting the bars together put each piece on the left of the bar and slide it all the way right; put the rocker arms so the "socket" the HLA goes in faces down like in the picture of the three arms. For the first bar all the rocker arms also have to face away from you opposite the picture of the three arms. The order of the first bar is: notched arm, spring, smooth arm; repeat 3 times. For the second bar all the rocker arms also have to face toward you like the picture of the three arms. The order of the second bar is: spacer, spring, smooth arm, notched arm, spring, spacer; repeat. Once you have everything on the bars, rotate them 180° so you can put the HLAs in. Put a little bit of oil in each up-side-down arm where the HLA was and insert the HLA with the HLA hole pointing down. Do this for every rocker arm.

11-10-03, 2:53	#9 (permalink)
Panther37 The Mod With the Mostest. Join Date: Apr 2001 Location: Patrick AFB, FL, USA Age: 27 iTrader: (0)	Next you need to get all the rocker arm on the bars in the right order. Did the numbers wear off? That's okay. I'll tell you the correct order. If you noticed in the picture of the three numbered rocker arms, numbers 1 and 3 have a notch on the side and number 2 doesn't. Arms with a notch are considered "notched" and arms without a notch are considered "smooth." The first bar is for the intake and toward the back of the car. The second bar is for the exhaust and is toward the front of the car. When putting the bars together put each piece on the left of the bar and slide it all the way right; put the rocker arms so the "socket" the HLA goes in faces down like in the picture of the three arms. For the first bar all the rocker arms also have to face away from you opposite the picture of the three arms. The order of the first bar is: notched arm, spring, smooth arm; repeat 3 times. For the second bar all the rocker arms also have to face toward you like the picture of the three arms. The order of the second bar is: spacer, spring, smooth arm, notched arm, spring, spacer; repeat. Once you have everything on the bars, rotate them 180° so you can put the HLAs in. Put a little bit of oil in each up-side-down arm where the HLA was and insert the HLA with the HLA hole pointing down. Do this for every rocker arm.