MX6.com - View Single Post

**Panther37** · 11-12-03, 3:13

Now hand tighten in the order below. Torque the valve cover on to about one third the torque of the rocker arm bar bolts, again in the order below. Now you can reconnect your ground wire, insert the PCV valve and gasket (if you removed them) and hoock them up. Also reattach the line to the air intake and the spark plugs. Now, fire up the car and let it idle for 5-10 min to let the RTV sealant seal up.

11-12-03, 3:13	#13 (permalink)
Panther37 The Mod With the Mostest. Join Date: Apr 2001 Location: Patrick AFB, FL, USA Age: 27 iTrader: (0)	Now hand tighten in the order below. Torque the valve cover on to about one third the torque of the rocker arm bar bolts, again in the order below. Now you can reconnect your ground wire, insert the PCV valve and gasket (if you removed them) and hoock them up. Also reattach the line to the air intake and the spark plugs. Now, fire up the car and let it idle for 5-10 min to let the RTV sealant seal up. Last edited by Panther37 : 5-7-05 at 18:23. Reason: Fix Pictures