Post 626 Pics here. - Page 19

CMJ626 · 7-28-08, 6:24

Ahhk, thanks for the info. The 626 already has spacers on it with its current 15s but I will have to measure up how big it is.
The Falcons off set is +36, I dont like the idea of running 20mm of spacer so I might give that a miss.

Do you know what the offset on the 626 is? The PCD should be the same though? 114.3?

**maffatato15** · 7-28-08, 11:48

Quote:

Originally Posted by CMJ626

G'day guys,
I just signed up, thought I'd post a few pics to break the ice.
Here's my stock GV 626 Estate, recently got her as a run around, the Falcon was costing too much to run every day.

With her big sister.

Hope ya like her

so how much for that 626 grille? i want one of those soooooo bad lol.

CMJ626 · 7-29-08, 1:50

Quote:

Originally Posted by maffatato15

so how much for that 626 grille? i want one of those soooooo bad lol.

Whats the difference?

**maffatato15** · 7-29-08, 8:14

we didnt have those grilles here in the U.S. It looks really cool with the mazda symbol in the middle. Our grilles had mazda in white lettering and were in the top right hand corner of the grille. Completely different.

This is my 89 mx6 (but has a 80-92 grille on it)

CMJ626 · 7-29-08, 9:20

You could probably get one from a Wrecker in Aus, might cost a bit extra for shipping but I don't think they'd mind.

Similar grille to the N13 Pulsars, 2 Horizontal bars with NISSAN in the top right.

**maffatato15** · 7-29-08, 10:26

ill just pm you instead of cluttering up this thread.

**Wibla** · 8-29-08, 20:30

I much prefer my 626 over the 6...

626ofall · 9-22-08, 20:02

This is my 626. 2 liter 5 spd! Gets 36 mpg too!

rusty_ · 10-9-08, 9:51

heres a cupple of my 1988 GD estate wagon

rusty_ · 10-9-08, 9:56

**jesiotrot** · 10-14-08, 2:55

Quote:

Originally Posted by rusty_

Looks awesome dude! What area you from?

rusty_ · 10-15-08, 7:53

Quote:

Originally Posted by jesiotrot

Looks awesome dude! What area you from?

edithvale haha wbu?

finishline · 10-15-08, 11:59

i think i like the 626 wagon.

**Brat** · 10-15-08, 15:09

this is it as i bought it.....

as it sits now.... i think its outta gas.. but thats were its parked for teh last month......

helen hunt falls, colorado

just a nice spot to hang, even in the snow/ice/sleet/rain.... lol

**Brat** · 10-15-08, 15:18

aww shucks i forgot its engine. it also has a oil catch can now.....

7-29-08, 8:14	#274 (permalink)
maffatato15 im back from BAN camp Join Date: Aug 2005 Location: endwell, NY, USA Age: 22 iTrader: (4)	we didnt have those grilles here in the U.S. It looks really cool with the mazda symbol in the middle. Our grilles had mazda in white lettering and were in the top right hand corner of the grille. Completely different. This is my 89 mx6 (but has a 80-92 grille on it)
	1991 lxt - parting out...ask for parts 1989 mx6 GT -LE Leather seat swap! Zombie chip, 2.5 inch turbo back exhaust, aluminum hard pipes, 8.8 mm Accel 300+ ferro-spiral race wires, blaster 2 coil, intrax lowering springs, factory rear strut bar, soon to be installed tbird

7-29-08, 10:26	#276 (permalink)
maffatato15 im back from BAN camp Join Date: Aug 2005 Location: endwell, NY, USA Age: 22 iTrader: (4)	ill just pm you instead of cluttering up this thread.
	1991 lxt - parting out...ask for parts 1989 mx6 GT -LE Leather seat swap! Zombie chip, 2.5 inch turbo back exhaust, aluminum hard pipes, 8.8 mm Accel 300+ ferro-spiral race wires, blaster 2 coil, intrax lowering springs, factory rear strut bar, soon to be installed tbird

8-29-08, 20:30	#277 (permalink)
Wibla 4ws newbie Join Date: May 2007 Location: Telemark, Norway Age: 24 iTrader: (0)	I much prefer my 626 over the 6...
	'88 Mazda 626 2.0i-16 4ws

10-9-08, 9:51	#279 (permalink)
rusty_ Join Date: May 2008 Location: iTrader: (0)	heres a cupple of my 1988 GD estate wagon Last edited by rusty_ : 10-9-08 at 11:07.
rusty_ Join Date: May 2008 Location: iTrader: (0)

10-9-08, 9:56	#280 (permalink)
rusty_ Join Date: May 2008 Location: iTrader: (0)	Last edited by rusty_ : 10-9-08 at 11:05.
rusty_ Join Date: May 2008 Location: iTrader: (0)

7-28-08, 6:24	#271 (permalink)
CMJ626 Join Date: Jul 2008 Location: Sydney, Australia iTrader: (0)	Ahhk, thanks for the info. The 626 already has spacers on it with its current 15s but I will have to measure up how big it is. The Falcons off set is +36, I dont like the idea of running 20mm of spacer so I might give that a miss. Do you know what the offset on the 626 is? The PCD should be the same though? 114.3?

7-29-08, 9:20	#275 (permalink)
CMJ626 Join Date: Jul 2008 Location: Sydney, Australia iTrader: (0)	You could probably get one from a Wrecker in Aus, might cost a bit extra for shipping but I don't think they'd mind. Similar grille to the N13 Pulsars, 2 Horizontal bars with NISSAN in the top right.

9-22-08, 20:02	#278 (permalink)
626ofall New Member Join Date: Sep 2008 Location: 850, FL, USA iTrader: (0)	This is my 626. 2 liter 5 spd! Gets 36 mpg too!

10-15-08, 11:59	#283 (permalink)
finishline New Member Join Date: Oct 2008 Location: South Bay, CA, USA Age: 19 iTrader: (0)	i think i like the 626 wagon.

10-15-08, 15:09	#284 (permalink)
Brat Join Date: Apr 2007 Location: colorado springs, CO, USA iTrader: (0)	this is it as i bought it..... as it sits now.... i think its outta gas.. but thats were its parked for teh last month...... helen hunt falls, colorado just a nice spot to hang, even in the snow/ice/sleet/rain.... lol

10-15-08, 15:18	#285 (permalink)
Brat Join Date: Apr 2007 Location: colorado springs, CO, USA iTrader: (0)	aww shucks i forgot its engine. it also has a oil catch can now.....