MX6.com - View Single Post

**Mr. MX6** · 10-14-04, 4:56

You should use the BKR6E 11 or a BKR5 11 in your ZE, you will find they are from an MX5 in Australia

I occasionally squirt Nitrous in to my ZE so I use the colder BKR7E 11 plugs..

The ones you have are a (5).. but the wrong design (longer)..same dimensions as the KLO3 uses..

you can use a 5 or a 6, on regular unleaded it would run better with a 5 .. but if you use PULP use the 6...

To “GAP” is the term used for setting the distance the spark jumps (intensity) you do it by using a feeler gauge between the 2 surfaces…

10-14-04, 4:56	#5 (permalink)
Mr. MX6 Join Date: May 2001 Location: Perth, Australia Age: 36 iTrader: (0)	You should use the BKR6E 11 or a BKR5 11 in your ZE, you will find they are from an MX5 in Australia I occasionally squirt Nitrous in to my ZE so I use the colder BKR7E 11 plugs.. The ones you have are a (5).. but the wrong design (longer)..same dimensions as the KLO3 uses.. you can use a 5 or a 6, on regular unleaded it would run better with a 5 .. but if you use PULP use the 6... To “GAP” is the term used for setting the distance the spark jumps (intensity) you do it by using a feeler gauge between the 2 surfaces… Last edited by Mr. MX6 : 10-25-05 at 6:39.
	People that think they know everything seriously annoy those of us that actually do.