MX6.com - View Single Post

**Gie** · 12-21-04, 17:31

Pretty easy, just drill and screw holes. But I did have to trim a little from the top center part and that wasn't hard at all since it is abs plastic.

12-21-04, 17:31	#7 (permalink)
Gie Join Date: May 2004 Location: iTrader: (0)	Pretty easy, just drill and screw holes. But I did have to trim a little from the top center part and that wasn't hard at all since it is abs plastic.
Gie Join Date: May 2004 Location: iTrader: (0)