FS: V6 5spd Conversion

Bizarre · 2-26-08, 23:52

This is a pretty much complete 5spd conversion for the v6 Heres whats included:

- Tranny (With bolts)
- Flywheel (With Bolts)
- Clutch
- Intermediate Shaft
- Slave cylinder
- Clutch Hard Line
- Clutch Master Cylinder
- Brake Fluid Reservoir
- Brake Pedal
- Clutch Pedal
- Driver side mount with Bracket
- Rear Motor mount bracket
- Shift Linkage with shifter
- Driver side Axle
- Starter

If I'm not forgetting that should be everything. I haven't used the tranny but I was told it was in excellent shape when it was removed. Heres the perfect situation of saving yourself the hassle of pulling it out a car. I'm looking for $400 which I think is a good price since the tranny alone almost goes for that. If you have any question feel free to pm me with your number. Thanks!!

EDIT: NEW PRICE IS $260 FIRM!!

This is my final price drop!
- Please dont waste my time if youre not serious
- No im not meeting you, this is pick up only.
- No I will not take any less than shown.

Bizarre · 3-2-08, 23:42

Still here guys, I might be willing to entertain some decent offers. Dont be shy. Thanks!

MX6Windsor · 3-3-08, 12:12

which tranny is it that you have ?

is it the PGT or the mx6 one ?

also where are you located i might be interested in the parts

Bizarre · 3-3-08, 12:59

Pmed you!

Bizarre · 3-11-08, 12:03

Quote:

Originally Posted by Bizarre

Still here guys, I might be willing to entertain some decent offers. Dont be shy. Thanks!

What he said!

ADZAM · 3-13-08, 13:57

I SENT YOU A email. don't know if you got it.. but i am interested in the set up .. first ? were do you live. i am in Michigan. i don't want shipping expense to get out of hand..
?? what is the parts out of.. and is the tranny in good condition..?? and how about the back up tail light switch. i know that has to be different.. it is not so important i sure i can find it else were but it would be nice if you have it..and do i need both drive axles i am not sure i have only put a little time in investigating this so far..so if i can get this shipped to my house at a reasonable price i will take this off your hands ....

oozzfrabaa

Bizarre · 3-25-08, 11:06

Alright well its still here.

Bizarre · 4-8-08, 0:14

Weather is nice out. Perfect for the summer season!

Bizarre · 4-17-08, 0:00

First decent offer takes it!!!

**mxicer** · 4-17-08, 11:27

I want it...if you have absolutely everything you need to make the car manual, I want to stick my millenia. My only problem is that I don't have the fund right now...would you take $300 for everything?

Bizarre · 4-17-08, 19:47

Check your pm. Thanks!

Bizarre · 5-11-08, 16:16

Still taking offers on this.

Bizarre · 6-27-08, 8:46

Still here.

havok786 · 7-31-08, 13:17

hey, I'm somewhat interested, been thinking about converting my auto mx6 for a while now...I'm in the GTA area so maybe we can work something out? I just have a couple questions, like how much would labor GENERALLY run me to do the whole thing at a shop? Also I know it'll be in there a while, but about how long do these things take? Sorry I'm not too car-savvy

Bizarre · 8-5-08, 19:36

To be honest with you Im not really sure what a shop would charge to do this since I was planning to do it myslef. If you were to do it yourself you could probably get it done working over a weekend, would probably be quicker for a shop to get it done. If you are serious pm me your number and we can work something out, I just want to get rid of these parts. Thanks!

2-26-08, 23:52	#1 (permalink)
Bizarre Join Date: Aug 2007 Location: Toronto iTrader: (0)	FS: V6 5spd Conversion This is a pretty much complete 5spd conversion for the v6 Heres whats included: - Tranny (With bolts) - Flywheel (With Bolts) - Clutch - Intermediate Shaft - Slave cylinder - Clutch Hard Line - Clutch Master Cylinder - Brake Fluid Reservoir - Brake Pedal - Clutch Pedal - Driver side mount with Bracket - Rear Motor mount bracket - Shift Linkage with shifter - Driver side Axle - Starter If I'm not forgetting that should be everything. I haven't used the tranny but I was told it was in excellent shape when it was removed. Heres the perfect situation of saving yourself the hassle of pulling it out a car. I'm looking for $400 which I think is a good price since the tranny alone almost goes for that. If you have any question feel free to pm me with your number. Thanks!! EDIT: NEW PRICE IS $260 FIRM!! This is my final price drop! - Please dont waste my time if youre not serious - No im not meeting you, this is pick up only. - No I will not take any less than shown. Last edited by Bizarre : 8-13-08 at 23:18.

3-3-08, 12:12	#3 (permalink)
MX6Windsor Join Date: Jun 2007 Location: Windsor, Canada Age: 33 iTrader: (0)	which tranny is it that you have ? is it the PGT or the mx6 one ? also where are you located i might be interested in the parts
	94 MX6 LS Dropped and tuned ...lets race!!!!! http://www.mx6.com/forums/gallery/19...ml#post1903460

4-17-08, 11:27	#10 (permalink)
mxicer Join Date: Jan 2002 Location: toronto Age: 31 iTrader: (0)	I want it...if you have absolutely everything you need to make the car manual, I want to stick my millenia. My only problem is that I don't have the fund right now...would you take $300 for everything?
	1995 Millenia KLZE engine, 8mm wires, NGK Iridium Plugs, JK Autosports CAI, Shaved key holes all around, Shaved marker lights, 4 12" MTX subs, Panasonic touchscreen motorized flip out deck, screens in the headrest and visors, White 5 Zigen 18" rims, lowered with Eibach Springs.

3-2-08, 23:42	#2 (permalink)
Bizarre Join Date: Aug 2007 Location: Toronto iTrader: (0)	Still here guys, I might be willing to entertain some decent offers. Dont be shy. Thanks!

3-3-08, 12:59	#4 (permalink)
Bizarre Join Date: Aug 2007 Location: Toronto iTrader: (0)	Pmed you!

3-13-08, 13:57	#6 (permalink)
ADZAM New Member Join Date: Mar 2008 Location: PORT HURON, MI, USA iTrader: (0)	I SENT YOU A email. don't know if you got it.. but i am interested in the set up .. first ? were do you live. i am in Michigan. i don't want shipping expense to get out of hand.. ?? what is the parts out of.. and is the tranny in good condition..?? and how about the back up tail light switch. i know that has to be different.. it is not so important i sure i can find it else were but it would be nice if you have it..and do i need both drive axles i am not sure i have only put a little time in investigating this so far..so if i can get this shipped to my house at a reasonable price i will take this off your hands .... oozzfrabaa

3-25-08, 11:06	#7 (permalink)
Bizarre Join Date: Aug 2007 Location: Toronto iTrader: (0)	Alright well its still here.

4-8-08, 0:14	#8 (permalink)
Bizarre Join Date: Aug 2007 Location: Toronto iTrader: (0)	Weather is nice out. Perfect for the summer season!

4-17-08, 0:00	#9 (permalink)
Bizarre Join Date: Aug 2007 Location: Toronto iTrader: (0)	First decent offer takes it!!!

4-17-08, 19:47	#11 (permalink)
Bizarre Join Date: Aug 2007 Location: Toronto iTrader: (0)	Check your pm. Thanks!

5-11-08, 16:16	#12 (permalink)
Bizarre Join Date: Aug 2007 Location: Toronto iTrader: (0)	Still taking offers on this.

6-27-08, 8:46	#13 (permalink)
Bizarre Join Date: Aug 2007 Location: Toronto iTrader: (0)	Still here.

7-31-08, 13:17	#14 (permalink)
havok786 New Member Join Date: Jan 2007 Location: Age: 25 iTrader: (0)	hey, I'm somewhat interested, been thinking about converting my auto mx6 for a while now...I'm in the GTA area so maybe we can work something out? I just have a couple questions, like how much would labor GENERALLY run me to do the whole thing at a shop? Also I know it'll be in there a while, but about how long do these things take? Sorry I'm not too car-savvy

8-5-08, 19:36	#15 (permalink)
Bizarre Join Date: Aug 2007 Location: Toronto iTrader: (0)	To be honest with you Im not really sure what a shop would charge to do this since I was planning to do it myslef. If you were to do it yourself you could probably get it done working over a weekend, would probably be quicker for a shop to get it done. If you are serious pm me your number and we can work something out, I just want to get rid of these parts. Thanks!