How to spot klze engine!?!?

jw02 · 6-21-08, 19:45

Hey im looking at buying a car off someone online and he says there is 70k on the klze engine he put in it...Can anyone tell me how I may be able to know for sure that this is the correct engine?> and i dont believe U can tell how many km a re on it but is there anything else I should be looking at with these engines

**kid_puma** · 6-21-08, 22:17

Before you buy the engine ensure its compression tested indication or some sort of proof that this procedure has been done. Obviously Straight neck or Curved. Do a search there are many threads on this matter that elaborate on engine codes Ect.
Hope that helps

~kp

**boltz** · 6-25-08, 9:00

heads have codes stamed you can check
manifold is a good way to check but that could be swapped on a OEM block.
compression should be arround 220-225psi done at WOT
the engine block should not have matching VIN tags, or it is missing

There are many ways to check.

6-21-08, 19:45	#1 (permalink)
jw02 New Member Join Date: Jun 2008 Location: , Canada iTrader: (0)	How to spot klze engine!?!? Hey im looking at buying a car off someone online and he says there is 70k on the klze engine he put in it...Can anyone tell me how I may be able to know for sure that this is the correct engine?> and i dont believe U can tell how many km a re on it but is there anything else I should be looking at with these engines

6-21-08, 22:17	#2 (permalink)
kid_puma Join Date: Aug 2003 Location: Ottawa,Ontario (Nations Capital), Canada Age: 25 iTrader: (1)	Before you buy the engine ensure its compression tested indication or some sort of proof that this procedure has been done. Obviously Straight neck or Curved. Do a search there are many threads on this matter that elaborate on engine codes Ect. Hope that helps ~kp
	© *MX6.COM*

6-25-08, 9:00	#3 (permalink)
boltz Join Date: Nov 2003 Location: Burnaby/Vancouver, Canada iTrader: (2)	heads have codes stamed you can check manifold is a good way to check but that could be swapped on a OEM block. compression should be arround 220-225psi done at WOT the engine block should not have matching VIN tags, or it is missing There are many ways to check.
	Mods: KLDE, HotShot Headers, 3" hi-flo kat & Injen Catback, CAI, CS SS clutch line, CM stg 3 clutch & Fidanza, RR Inserts, HEI module + 6AL + Blaster coil, GoodRidge KVR SS brake lines, Ksport Coilovers, F+R STB, M-Edition red tails, SS door sills, Zeitronics ZT1 WBo2, Rblt HLA's, New Friction gear springs.. Mods To Come: SC, injectors, AFPR, MaftPro, RR-STS, Traction bars.