2 Sets -K6F Traction Bars $275.00 Shipped Each (Canada Add $10.00 for Shipping)



These are my custom upgraded design of traction bars. Similar to setups ran on probetalk, but these are made for better clearence, fitment and utlitilize a stronger mounting position. Only 2- 1/4 Holes , and 2- 3/8 Holes need to be drilled for installation, Otherwise it used all the stock holes/bolts.

They are made using AFCO Rod ends and linkages. ALL Grade 8 hardware with lock nuts. Material is DOM tubing and 3/16 Flat Steel. Very Strong Setup

i have a 5 speed transmission out of a 90 mx6 gt 2nd gear grinds when going in it hard,clutch was bout gone so might have been that.i'm not sure how much they go for but give me an offer,but no low ballin'. pics will be up tomorrow

Klze kl31 straight neck manifold with injectors,vris,trotle body at the end with everything you need to installed
for sale send me offers here
I talk english and spanish
my email is javyomar2007@hotmail.com
this the intake manifold

$35 shipped plus paypal fees

Hello all, after building and selling my former 350whp Mx6 GT, I accumulated MANY parts from different sources over the years. I have a room full of enough parts to put together 2 engine bays almost hehe. Anyways, EVERYTHING is for sale at the best reasonable price I could come up with, and im always open to offers. Im located in Toronto, Ontario, Canada so pickup is definitely preferred, and much more willing to work on pricing if things are arranged to be picked up. Anyways, this is gonna be a massive list with many pics, and i'll try to organize things the best I can. No prices here include shipping, and all prices are in CAD. All Parts listed for 2.2T 1st gen MX6/Probe.

1 90+ Ford Probe GT F2t Shortblock. Can include set of F2t rods and pistons if requested. $50 for block, $75 with pistons. Pricing will vary if separated and if having to ship.




1 Bran new MINT Condition(50kms?) OEM Mazda TB Boot - SOLD
1 Rebuilt Low mileage alternator - $50 CAD
1 Rebuilt Low mileage starter motor - $50 CAD


1 F2t Cooling fan(came off my personal mx6 gt, worked flawlessly) - $20 CAD
2 Unknown Mileage Alternators - $15 each


Low Mileage Fenco Driver and Passenger side Axles w/ Intermediate shaft - $60 CAD


Oil Pan w/ Oil Dipstick - $30 CAD



2 Primary Used O2 sensors with harness clips - $5 bucks each
2 AAS Motors with Dust Covers - $10 Bucks for the pair
2 Mint/New condition Engine Timing Belts - $20 bucks each
2 Upper Rad Supports - $10 bucks for Pair
PCV Hoses from valve cover to intake/Intake manifold to Valve Cover - $20 for all mint hoses.
1 Ignition Coil(with hacked wiring) - $10 bucks
1 Ignition Coil w/ Ignitier (Good Condition) - $30 bucks
1 90+ GT Distributor Assembly - $25
1 Unknown Mileage Starter Motor(looks to be in great shape) - $25




1 F2t Fuel Pressure Regulator (Worked Great) - $20
1 Fuel Filter Bracket for F2t - $5


2 Sets of Upper and Lower Rad Hoses - $10 per set
1 F2t Crank Pulley - $10
F2t Turbo oil Feed line - $10
1 I/C Hose from Bypass valve to turbo - $5
Coolant line for Waterpump - $ 10


1 P/S Pump w/ lines - $20
1 Bran New Press in Ball Joint - $15


Very good condition MSD Red IgnitionWires - SOLD

2 Sets of stock F2t Fuel injectors - $20 per set
1 Bran New OEM Mazda Driverside door Hinge – $20
1 Used good condition Boost Guage - $15
Various Relays/Fuses/headlight sockets & Dust covers – Make Offer
1 Stock gearshift knob - $5
1 AEM Whiteface guage cover - $8


1 Digital Exhaust Gas Temperature (Pyrometer) Guage w/Probe, reads to 2200oF - SOLD!

1 Coolant Reservoir w/ cap – $20
1 Good condition HVAC Unit - $20
1 Rear Spoiler light - $10
1 Bypass Delete Pipe for use with Blow Off Valve, uses stock piping - $15


All 4 corners stock MX6 GT Springs - $40


4 Mazda OEM Rims(Will take better pics later, need to be cleaned up but nothing damaged)


This thread will be constantly updated, as im pretty sure I have other spare parts laying around. Name is Brian and you can reach me by PM or E-mail bpalma70@hotmail.com. I would prefer local pickup, but willing to ship at buyers expense. If everyone is interested in EVERYTHING, that can be arranged for an awsome price to clear my basement out lol. Paypal address is bpalma70@hotmail.com as well. Thanks for looking!

Sup everyone? I have a spare set of Millenia S injectors. $65 shipped, only small detail is two of the clips is broken off one injector. I can promise you, this does not affect anything at all, or I would not be selling them.

Up for sale is my turbosmart dual port bov. I have loved this little guy ever since i bought, but since i am about to do my FMIC and blow through i want to switch toa tial. I am asking 220 shipped obo.




Prosport premium egt gauge w/new probe 90 shipped



LIKE NEW Prosport WB02(new sensor and control box)

I have a perfect condition SC14 clutched supercharger I was going to use for a twin charging project, but I am moving and the car is being sold instead.

This is very similar is size to an M62. It has an electric clutch.

It is also very compact, ~11" long and 8.5" wide. The pulley is 4.5-4.75" OD.

Perfect condition. Spins freely, no play in the pulley, no noises. Came from a low mileage engine.

Comes with all the piping so you can cut it up and do whatever you need with it. These are very efficient and great for engines <3L displacement. I don't check my PM's much so email me rebel2k4@hotmail.com

$190 shipped in the lower 48, no PO boxes.
[img=http://img689.imageshack.us/img689/6064/004r.jpg]

[img=http://img41.imageshack.us/img41/4426/006ztu.jpg]

[img=http://img22.imageshack.us/img22/3088/007hi.jpg]

I have a pair of front calipers for a 93-97. They were painted silver, but have seen their fair share of weather, they could use a fresh coat of paint. They work perfectly. I also have a set of pads and rotors to go with them, they are used, but they still have some good life left in them. Only $25 plus shipping for everything!

Had a couple of buyers on here back out on me, and I have not had any luck selling it locally so I decided to re-post it at 500 dollars cheaper price to try to get it out of my garage.


Heres the rundown. The built longblock only has 250 miles on it!!!!

What I put into it
$760 - 8.5-1 Diamond forged pistons with ceramic top coat and moly skirt coat.
$430 - H beam forged rods
$3000 - Motor Build


What I would like out of it
$2000 obo (we can negotiate on shipping) - Built Long block, rods, pistons, heads. No I/E Manifolds


MOTOR PICS

hey guys. its been a while since iv been on here. Time to sell the parts since i dont own the car anymore. I have a gunmetal im with a bored out neck. i got it off another member on here but i was never able to put it on the car. i would really love to see the diff but times an money arent gonna let me see that i guess. Anyway i didnt upload the pic on here but have a link to my myspace with all the pics. i also have espec tailights an 10k rpm autometer tack for sale.

MySpace. kinda long worked for me i tried it to make sure so it will take up right to my albums than jus click on my cars an erything will be on the second page. srry for all the loops. thanks.

I have a pair of painted and decaled front calipers for a 2004-2008 mazda 3 s (for a 10.8" diameter rotor, for reference). Misinformed, i bought these calipers to do a big brake conversion on my mx-6. I got them painted and decaled up, then went to bolt 'em on, and surprise! not a chance:( They were painted with high temperature caliper paint, and using high temperature decals. They are in mint condition, but they will not work on a mx-6. They would be a beautiful finishing touch on a mazda 3! I have had the same thing on my 626 for 3 years and they still look incredible! I am asking $200 for the pair as they are over $100 each, plus tax, paint, decals, labour(we may have to discuss shipping costs if it is too expensive to your location). shipping will be expensive because they are heavy, so pick up would be preferred. I am in Cambridge Ontario. Maybe we can make a deal, give me a shout:)

Selling mine MSD blaster coil 2 with MSD Bracket.

MSD Blaster Coil #8202

for sale rebuilt 5spd mtx with new exeddy clutch kit and resufaced flywheel

for $400 + shipping

turbo - $180.00 or best offer and open to trades but no scammers!!!!
2.5 mandrel bent downpipe stainless steel i think - $60.00 or best offer and open to trades
paypal ready
seems larger than tbird!!!
need this gone so pm me please

i have a ihi upgraded turbo. i will not ship it with the manifold because the manifold has an external wastegate and we cut it off and because the turbine housing has been welded to the manifold because the gaskets kept going bad.. turbo will be shipped with just the compressor housing and center cartridge with no exhaust housing... this turbo has a turbine wheel upgrade so it has a larger diameter turbine wheel so it should not fit into a stock turbine housing.... basically i guess without me shipping the entire manifold and turbo its only good for a compressor wheel and housing upgrade......

this installs exactly like a tbird upgrade and seems to be larger than a tbird upgrade.. direct bolt on for the stock turbo.....

turbine inlet is 2.25
stock is a bout 1.75

here are the pics