FE is alive!! Coil on plug/MSnS

**AMD IS THE BEST** · 4-14-07, 5:55

Hello everyone, I have an other thread going but I am not sure if some if you guys make it over there. I got the probe up and running this week and it is off to have the manifold made tomorrow. Here are some pics/clips of it:

Nissan SR20DET Splitfire coils:

YouTube - FE is alive (MegaSquirt)

YouTube - FE Reving (MegaSquirt)

**fredio54** · 4-14-07, 6:24

awesome, hows the fit of those things. easy to get here...

looks like you just have them sitting in, but also looks like brackets would be easy to make.

fred.

**AMD IS THE BEST** · 4-14-07, 6:28

They are a little but too tall, but the fit nice and snug on the plugs themselves. I ran 8 gauge grounding wires to each coil and I am putting the spark plug cover over the top. Thanks, Nick

**Casejunkie** · 4-14-07, 9:55

Can you find those on every stock Nissan SR20DET?

**fredio54** · 4-14-07, 16:33

not the early ones no.

Stroker · 4-15-07, 4:32

Can you use the splitfire coil packs with a CDI

**AMD IS THE BEST** · 4-15-07, 5:03

Quote:

Originally Posted by Casejunkie

Can you find those on every stock Nissan SR20DET?

You can not find these coils on any stock SR20DET, they are an aftermarket kit for them.

Quote:

Originally Posted by Stroker

Can you use the splitfire coil packs with a CDI

I am pretty sure that you can not, these coils have built in ignitors.

**fredio54** · 4-15-07, 5:25

wtf, so those arent stock sr20det coils? cause they ARE cop, and do look similar. are they "upgrades"? surely they are physically the same sizes...

fred.

**AMD IS THE BEST** · 4-15-07, 5:56

Quote:

Originally Posted by fredio54

wtf, so those arent stock sr20det coils? cause they ARE cop, and do look similar. are they "upgrades"? surely they are physically the same sizes...

fred.

That is correct, they are not stock on the sr20det. These are Splitfires. SplitFire Performance Ignition System

**fredio54** · 5-2-07, 21:58

AMD, could you post or email your msq etc here when you get the tune close. i'll be looking for some data soon :-)

fred.

**shwine617** · 5-2-07, 22:16

nice work, I just got mine running again the other day, so I know how you feel.
now you just need a nice turbo. good luck

**mazdaspeedX6** · 5-2-07, 22:29

good job man if i heard the sound of the car with out looking at the vid i would have thought it was a rotary.

**AMD IS THE BEST** · 5-3-07, 6:06

Quote:

Originally Posted by fredio54

AMD, could you post or email your msq etc here when you get the tune close. i'll be looking for some data soon :-)

fred.

Def Fred. I should have the car back today

and I can send you what I have.

Quote:

Originally Posted by shwine617

nice work, I just got mine running again the other day, so I know how you feel.
now you just need a nice turbo. good luck

It is exciting, and I already have a nice turbo (GT35r) which is on the car right now, just have to get it back.

Quote:

Originally Posted by mazdaspeedX6

good job man if i heard the sound of the car with out looking at the vid i would have thought it was a rotary.

Thanks, it does rev really quick....doesn't it?

4-14-07, 5:55	#1 (permalink)
AMD IS THE BEST Join Date: May 2003 Location: Schenectady, NY, USA Age: 23 iTrader: (0)	FE is alive!! Coil on plug/MSnS Hello everyone, I have an other thread going but I am not sure if some if you guys make it over there. I got the probe up and running this week and it is off to have the manifold made tomorrow. Here are some pics/clips of it: Nissan SR20DET Splitfire coils: YouTube - FE is alive (MegaSquirt) YouTube - FE Reving (MegaSquirt)
	90' PGT, FE-DOHC, GT35R, MSnS - 13.2 @ 114 - RIP 2001 Audi S4 - Stage 3 - 11.8 @ 121.5 99.5 Audi A4 DD

4-14-07, 6:24	#2 (permalink)
fredio54 Join Date: Aug 2004 Location: Auckland, New Zealand iTrader: (1)	awesome, hows the fit of those things. easy to get here... looks like you just have them sitting in, but also looks like brackets would be easy to make. fred.
	DIYEFI.org - TRUE DIY engine management Mazda FE3/FE-DOHC Master Index Thread (work in progress) Mazda truck with FE-DOHC/FE3 "BIG like your house" Holset Turbo drinking 2.2 litres of fuel per minute ~= 385hp crank RIP SleepCounter :-( we will miss you! - RIP fredio54 :-( will we miss you?

4-14-07, 6:28	#3 (permalink)
AMD IS THE BEST Join Date: May 2003 Location: Schenectady, NY, USA Age: 23 iTrader: (0)	They are a little but too tall, but the fit nice and snug on the plugs themselves. I ran 8 gauge grounding wires to each coil and I am putting the spark plug cover over the top. Thanks, Nick
	90' PGT, FE-DOHC, GT35R, MSnS - 13.2 @ 114 - RIP 2001 Audi S4 - Stage 3 - 11.8 @ 121.5 99.5 Audi A4 DD

4-14-07, 16:33	#5 (permalink)
fredio54 Join Date: Aug 2004 Location: Auckland, New Zealand iTrader: (1)	not the early ones no.
	DIYEFI.org - TRUE DIY engine management Mazda FE3/FE-DOHC Master Index Thread (work in progress) Mazda truck with FE-DOHC/FE3 "BIG like your house" Holset Turbo drinking 2.2 litres of fuel per minute ~= 385hp crank RIP SleepCounter :-( we will miss you! - RIP fredio54 :-( will we miss you?

4-15-07, 5:25	#8 (permalink)
fredio54 Join Date: Aug 2004 Location: Auckland, New Zealand iTrader: (1)	wtf, so those arent stock sr20det coils? cause they ARE cop, and do look similar. are they "upgrades"? surely they are physically the same sizes... fred.
	DIYEFI.org - TRUE DIY engine management Mazda FE3/FE-DOHC Master Index Thread (work in progress) Mazda truck with FE-DOHC/FE3 "BIG like your house" Holset Turbo drinking 2.2 litres of fuel per minute ~= 385hp crank RIP SleepCounter :-( we will miss you! - RIP fredio54 :-( will we miss you?

4-14-07, 9:55	#4 (permalink)
Casejunkie Join Date: Dec 2005 Location: Bavel, The Netherlands Age: 23 iTrader: (1)	Can you find those on every stock Nissan SR20DET?

4-15-07, 4:32	#6 (permalink)
Stroker Banned Join Date: Mar 2005 Location: Sydney, Australia Age: 34 iTrader: (0)	Can you use the splitfire coil packs with a CDI

5-2-07, 21:58	#10 (permalink)
fredio54 Join Date: Aug 2004 Location: Auckland, New Zealand iTrader: (1)	AMD, could you post or email your msq etc here when you get the tune close. i'll be looking for some data soon :-) fred.
	DIYEFI.org - TRUE DIY engine management Mazda FE3/FE-DOHC Master Index Thread (work in progress) Mazda truck with FE-DOHC/FE3 "BIG like your house" Holset Turbo drinking 2.2 litres of fuel per minute ~= 385hp crank RIP SleepCounter :-( we will miss you! - RIP fredio54 :-( will we miss you?

5-2-07, 22:16	#11 (permalink)
shwine617 Join Date: Aug 2004 Location: Spotswood, NJ, USA Age: 23 iTrader: (0)	nice work, I just got mine running again the other day, so I know how you feel. now you just need a nice turbo. good luck
	90 MX6 GT http://www.cardomain.com/ride/2036393 Stock: 15.446 @ 88.78 F2T Best: 12.71 @ 104 FE3T: 11.941 @ 99.03 (missed 4th) 470 WHP Turbonetics 50 trim @ 30psi videos:http://videos.streetfire.net/uploaded/Shwine617.htm

5-2-07, 22:29	#12 (permalink)
mazdaspeedX6 Lets go ! Join Date: Oct 2004 Location: Bronx, NY, USA Age: 25 iTrader: (1)	good job man if i heard the sound of the car with out looking at the vid i would have thought it was a rotary.
	93 black pgt 5spd (sold) 93 mazda mx6 ls (being rebuilt) 05 scion tc (hers) 93 mazda rs mx6 (donated) 05 toyota corrola le (traded) 96 mitsu eclipes (sold) 89 plymouth sundance (abandon) 84 honda accord should (have burned it, abandon) (DD car 94 mx3 rs 5spd interesting car it is.)