SCAT ROD BULK BUY, Have you paid check here

**chief tool** · 6-3-08, 16:55

PLEASE REFER TO THE DISCUSSION THREAD.
----------------------------------------------------------

Everyone, please see the list below.
If you your not aware of what is going on, Stroker is Collecting the 1/2 payments via Paypal.

If you have paid but the list says you havent, please check with Stroker.

If you havent paid, we are waiting on YOU! the half payment is not alot of money, so lets have it ASAP so we can get this started

Contact Stroker for the paypal invoice.

Rod specs:
Forged H-beam rods
4340 Steel
Heat Treated
Shot Peened
ARP 2000 bolts
balanced within +/- 1 gram
He said they are good for around 1000hp and 10,000 rpm

thats $260 for four forged rods!!
So we need 45 people to buy a set of four.

THESE CAN BE SHIPPED WORLDWIDE!

THE LIST: only half of these people have contacted me.(Stroker)

Shwine617 2 sets
Shqs89gt 2 sets
Zlyricist 2 sets
STW 2 sets Paid
Stroker 2 sets Paid
Cam22t 2 sets
Mazda929 2 sets paid
Jesiotrot 2 sets paid
Eraezer 2 sets paid
Casejunkie 2 set paid
PGTF2T 1 set
Fe3t B2200 1 set
MidnightCamaro 1 set
Chief Tool 1 set Paid
Dino 1 set
Martinsen 1 set
Defboy35 1 set
Alwaysbrokenmx6 1 set
Monoxidechild 1 set
M2cupcar 1 set paid
Dutch 1 set paid
Bakmans 2 sets paid
Racer_smokm1 1 set
MesXco6rt 1 set
Mazdafreaks 1 set paid
LostSoulMiata 1 set
Rbluemx6 1 set
BoostedBseries 1 set
Bpt323 1 set paid
funhouse75 1 set
NL626gt 1 set
LMB 1 set paid
Zoom 1 set paid
Gmans89gt 1 set
G0llyw0g 1 set

**monoxidechild** · 6-3-08, 20:32

half payment was sent for me.

**PGTF2T** · 6-8-08, 13:14

I have sent full payment for one set.

TurboLarry · 7-1-08, 12:50

Hi guys
I am lars from germany. i drive a ford probe gt with the f2t engine. i read this threat today and i wondered if this set is only for the fe 3 or also for the f2t engine? i am searching for h-beam connecting rods and forged pistons for my f2t engine.can anyone help me, where i can get it?

**eraezer** · 7-1-08, 13:40

Hi Lars, this rods for the FE3 engine only.

TurboLarry · 7-2-08, 9:50

ok thank you. and can anyone tell me, where i can get some h-beam rods for the f2t engine?
tnanks in advance

**bpt323** · 7-2-08, 13:05

This is my compiled list of People who HAVE & who haven't paid seperated into 2 lists
------------------------------------------------------------
~PAID~
_____________________________________________________
STW 2 sets Paid
Stroker 2 sets Paid
Mazda929 2 sets paid
Jesiotrot 2 sets paid
Eraezer 2 sets paid
Casejunkie 2 set paid
Chief Tool 1 set Paid
M2cupcar 1 set paid
Dutch 1 set paid
Bakmans 2 sets paid
Mazdafreaks 1 set paid
Bpt323 1 set paid
LMB 1 set paid
Zoom 1 set paid
PGTF2T 1 set paid
Monoxidechild 1 set paid
Shqs89gt 2 sets
__________________________________________________________

*************UNPAID*************
-------------------------------------------------------------------
Shwine617 2 sets
Zlyricist 2 sets
Cam22t 2 sets
Fe3t B2200 1 set
MidnightCamaro 1 set
Dino 1 set
Martinsen 1 set
Defboy35 1 set
Alwaysbrokenmx6 1 set
Racer_smokm1 1 set
MesXco6rt 1 set
LostSoulMiata 1 set
Rbluemx6 1 set
BoostedBseries 1 set
funhouse75 1 set
NL626gt 1 set
Gmans89gt 1 set
G0llyw0g 1 set
__________________________________________________
Please Help Me PM The Members Who Have Not Paid

**bpt323** · 7-2-08, 15:31

I've PM'ed/emailed/ asked the admin to email. covering all of the members who have not paid yet. regardless of anything we need the rest of the members to come forward. Please help me by sending out PM's to these members as well

**zlyricist** · 7-2-08, 15:53

i stated a while back im only in for 1 set. i have the cash which is the least of my worries...... wether you guys agree with this or not, i wont be paying until i see this is almost ready to go through

**Dutch** · 7-2-08, 16:14

would be nice to see some more people pay their rods..
if everybody shares the same thought as Zly then this is not going to work very well i think.
no hardfeelings there

**zlyricist** · 7-2-08, 16:18

for those who have done business with me, 99% of the time i go through with what i say im going to do. i know im good for it, but i honestly am not sure about everyone else

**shqs89gt** · 7-2-08, 16:24

I've already paid for my 2 sets.

Dino · 7-13-08, 17:59

i need to know where 2 place the money and excactly how much i have to pay. then ill pay... i have the money on stand by...

**Zach** · 7-13-08, 18:10

Dino, please read the first post.

Stroker · 7-14-08, 2:49

By the way il look after who's paid or not it will get confucing if every body starts puting up posts

6-3-08, 16:55	#1 (permalink)
chief tool Join Date: Feb 2006 Location: Sydney, Australia Age: 36 iTrader: (2)	SCAT ROD BULK BUY, Have you paid check here PLEASE REFER TO THE DISCUSSION THREAD. ---------------------------------------------------------- Everyone, please see the list below. If you your not aware of what is going on, Stroker is Collecting the 1/2 payments via Paypal. If you have paid but the list says you havent, please check with Stroker. If you havent paid, we are waiting on YOU! the half payment is not alot of money, so lets have it ASAP so we can get this started Contact Stroker for the paypal invoice. Rod specs: Forged H-beam rods 4340 Steel Heat Treated Shot Peened ARP 2000 bolts balanced within +/- 1 gram He said they are good for around 1000hp and 10,000 rpm thats $260 for four forged rods!! So we need 45 people to buy a set of four. THESE CAN BE SHIPPED WORLDWIDE! THE LIST: only half of these people have contacted me.(Stroker) Shwine617 2 sets Shqs89gt 2 sets Zlyricist 2 sets STW 2 sets Paid Stroker 2 sets Paid Cam22t 2 sets Mazda929 2 sets paid Jesiotrot 2 sets paid Eraezer 2 sets paid Casejunkie 2 set paid PGTF2T 1 set Fe3t B2200 1 set MidnightCamaro 1 set Chief Tool 1 set Paid Dino 1 set Martinsen 1 set Defboy35 1 set Alwaysbrokenmx6 1 set Monoxidechild 1 set M2cupcar 1 set paid Dutch 1 set paid Bakmans 2 sets paid Racer_smokm1 1 set MesXco6rt 1 set Mazdafreaks 1 set paid LostSoulMiata 1 set Rbluemx6 1 set BoostedBseries 1 set Bpt323 1 set paid funhouse75 1 set NL626gt 1 set LMB 1 set paid Zoom 1 set paid Gmans89gt 1 set G0llyw0g 1 set Last edited by Goatcrapp : 7-19-08 at 10:57.
	84 626 sedan FE SOHC turbo (sleeper) 89 626 5 door F2T 90 323 sedan B6 SOHC Slug-o-matic DD, sold...too slow

6-3-08, 20:32	#2 (permalink)
monoxidechild Join Date: Dec 2002 Location: RocKForD, ChiPoC!.!.!.!, IL, USA Age: 27 iTrader: (1)	half payment was sent for me.
	*~ChiPoC~*

7-1-08, 13:40	#5 (permalink)
eraezer Join Date: Nov 2004 Location: , Sweden Age: 23 iTrader: (0)	Hi Lars, this rods for the FE3 engine only.
	-:\|my GC\|:- Mazda 626 lx coupe 1984, 2l FE carb., 99% rustfree, Waiting on shelf: Custom Koni's + Koni springs -:\|my GD\|:- Mazda 626 glx hatchback 1990, FE-DOHC, Dutch FSTbar, MS2 PCB v3.0, Innovate LC-1, Mitsubishi TD04-15T @ 0.55bar. Soon TD05H-16G + new manifold

7-2-08, 13:05	#7 (permalink)
bpt323 Join Date: May 2006 Location: madison, WI, USA Age: 23 iTrader: (1)	This is my compiled list of People who HAVE & who haven't paid seperated into 2 lists ------------------------------------------------------------ ~PAID~ _____________________________________________________ STW 2 sets Paid Stroker 2 sets Paid Mazda929 2 sets paid Jesiotrot 2 sets paid Eraezer 2 sets paid Casejunkie 2 set paid Chief Tool 1 set Paid M2cupcar 1 set paid Dutch 1 set paid Bakmans 2 sets paid Mazdafreaks 1 set paid Bpt323 1 set paid LMB 1 set paid Zoom 1 set paid PGTF2T 1 set paid Monoxidechild 1 set paid Shqs89gt 2 sets __________________________________________________________ ***********UNPAID*********** ------------------------------------------------------------------- Shwine617 2 sets Zlyricist 2 sets Cam22t 2 sets Fe3t B2200 1 set MidnightCamaro 1 set Dino 1 set Martinsen 1 set Defboy35 1 set Alwaysbrokenmx6 1 set Racer_smokm1 1 set MesXco6rt 1 set LostSoulMiata 1 set Rbluemx6 1 set BoostedBseries 1 set funhouse75 1 set NL626gt 1 set Gmans89gt 1 set G0llyw0g 1 set __________________________________________________ Please Help Me PM The Members Who Have Not Paid Last edited by Justin : 7-9-08 at 15:28.

7-2-08, 15:53	#9 (permalink)
zlyricist Join Date: May 2004 Location: arvada, CO, USA Age: 24 iTrader: (5)	i stated a while back im only in for 1 set. i have the cash which is the least of my worries...... wether you guys agree with this or not, i wont be paying until i see this is almost ready to go through
	I'm Zlyricist, and I approve this message 91 GT - 95 LS 06 maxima - the daily

7-1-08, 12:50	#4 (permalink)
TurboLarry New Member Join Date: Jul 2008 Location: , Germany Age: 28 iTrader: (0)	Hi guys I am lars from germany. i drive a ford probe gt with the f2t engine. i read this threat today and i wondered if this set is only for the fe 3 or also for the f2t engine? i am searching for h-beam connecting rods and forged pistons for my f2t engine.can anyone help me, where i can get it?

7-2-08, 9:50	#6 (permalink)
TurboLarry New Member Join Date: Jul 2008 Location: , Germany Age: 28 iTrader: (0)	ok thank you. and can anyone tell me, where i can get some h-beam rods for the f2t engine? tnanks in advance

7-2-08, 15:31	#8 (permalink)
bpt323 Join Date: May 2006 Location: madison, WI, USA Age: 23 iTrader: (1)	I've PM'ed/emailed/ asked the admin to email. covering all of the members who have not paid yet. regardless of anything we need the rest of the members to come forward. Please help me by sending out PM's to these members as well

7-2-08, 16:18	#11 (permalink)
zlyricist Join Date: May 2004 Location: arvada, CO, USA Age: 24 iTrader: (5)	for those who have done business with me, 99% of the time i go through with what i say im going to do. i know im good for it, but i honestly am not sure about everyone else
	I'm Zlyricist, and I approve this message 91 GT - 95 LS 06 maxima - the daily

7-2-08, 16:24	#12 (permalink)
shqs89gt Join Date: Nov 2003 Location: Parkville, MD, USA Age: 26 iTrader: (0)	I've already paid for my 2 sets.
	89 PGT weekend racecar,12.55@110mph,114mph best trap speed,slow.a few mods RIP F2T,donated to a friend,now FE3T,times to come soon. 89 PGT DD,15.0@97,slower,a few mods. 91PGT,weekend cruiser,show car.

7-13-08, 17:59	#13 (permalink)
Dino Join Date: Feb 2007 Location: sorum, norway Age: 20 iTrader: (0)	i need to know where 2 place the money and excactly how much i have to pay. then ill pay... i have the money on stand by...

7-13-08, 18:10	#14 (permalink)
Zach All aboard the B& V& Join Date: Nov 2004 Location: Age: 32 iTrader: (8)	Dino, please read the first post.
	Squirted 1g GT - T04E 57trim - 550's - Deltamark II External WG - P/S+A/C Delete - Four Vacuum Lines - Open Dump - 18psi

7-14-08, 2:49	#15 (permalink)
Stroker Banned Join Date: Mar 2005 Location: Sydney, Australia Age: 34 iTrader: (0)	By the way il look after who's paid or not it will get confucing if every body starts puting up posts