built 4 cyl head for sale

**mjmmx693** · 5-15-08, 14:57

I have a head for the 4 cyl that has a 3 angle valve job and is mildly ported...It has about 2000 miles on it and runs fine...I don't think i will be needing it but I'm no 100% sure yet..I il know shortly. I figured i will put i up here and see is anyone was interested. Depending on what you are going to use it for, the springs and valves will need to be changed.
>>>The porting and 3 angle valve job was done by a shop, not me!

**zlyricist** · 5-16-08, 16:29

is this for a fs, or a f2 motor

**mjmmx693** · 5-19-08, 20:07

fs motor

westbranchman · 5-21-08, 9:03

any idea what you will be asking for it

**ZE Power MX6** · 5-21-08, 9:59

^ x2

Also, why do we need change the springs and valves?

**mjmmx693** · 5-27-08, 10:43

I would say price between 250-500 (like i said not sure what i want to do yet) and the valves and springs havent been changed out yet...so if you are looking to turbo then i would switch out the springs...and if your gonna pay for new springs you should just do the valves to and make sure its 100% perfect before throwing it on....you dont have to but it does depend on what you are looking to get out of it
PS sorry it took so long i was in jamaica for vacation

**Keeloh** · 5-27-08, 15:09

250 to 500 just keep the head

**professorblaze** · 5-27-08, 17:06

you could sell it for 150-200 but 250-500 for a head is unbelievable for a used, needs rebuilt, head...

**mjmmx693** · 5-28-08, 11:04

yeah well the having a shop port and do a 3 angle valve job isnt cheap

**mjmmx693** · 5-28-08, 11:06

i'm willing to let it go for 200... but the job done wasnt by some kid in a basement, it was a local shop that does it as a living

**ZE Power MX6** · 5-28-08, 12:36

A picture might help, did you change the valve seals?

westbranchman · 6-3-08, 16:14

So what does this head need to go in a non turbo car and what the lowest price shipped to 17701

**mjmmx693** · 6-5-08, 11:01

needs to be bolted up for a non turbo

westbranchman · 6-6-08, 12:44

so whats the best price to 17701

5-15-08, 14:57	#1 (permalink)
mjmmx693 Join Date: Mar 2006 Location: west chester, PA, USA Age: 20 iTrader: (0)	built 4 cyl head for sale I have a head for the 4 cyl that has a 3 angle valve job and is mildly ported...It has about 2000 miles on it and runs fine...I don't think i will be needing it but I'm no 100% sure yet..I il know shortly. I figured i will put i up here and see is anyone was interested. Depending on what you are going to use it for, the springs and valves will need to be changed. >>>The porting and 3 angle valve job was done by a shop, not me!

5-16-08, 16:29	#2 (permalink)
zlyricist Join Date: May 2004 Location: arvada, CO, USA Age: 24 iTrader: (5)	is this for a fs, or a f2 motor
	I'm Zlyricist, and I approve this message 91 GT - 95 LS 06 maxima - the daily

5-21-08, 9:59	#5 (permalink)
ZE Power MX6 Join Date: Jul 2002 Location: Chicago Age: 27 iTrader: (9)	^ x2 Also, why do we need change the springs and valves?
	M-Edition Turbo - Motor build underway 94 RS - The daily Zoom-Zoom

5-27-08, 15:09	#7 (permalink)
Keeloh 2.2 i Join Date: May 2007 Location: Los Angeles iTrader: (28)	250 to 500 just keep the head
	Bone Stock.

5-27-08, 17:06	#8 (permalink)
professorblaze Join Date: Jun 2007 Location: Lakewood, WA, USA Age: 26 iTrader: (10)	you could sell it for 150-200 but 250-500 for a head is unbelievable for a used, needs rebuilt, head...
	'03 SRT4 - DD http://www.cardomain.com/ride/3107934 '89 MX-6 GT - R.I.P 13JUN2008 - parts still for sale

5-19-08, 20:07	#3 (permalink)
mjmmx693 Join Date: Mar 2006 Location: west chester, PA, USA Age: 20 iTrader: (0)	fs motor

5-21-08, 9:03	#4 (permalink)
westbranchman Join Date: Jan 2008 Location: Williamsport, PA, USA Age: 44 iTrader: (0)	any idea what you will be asking for it

5-27-08, 10:43	#6 (permalink)
mjmmx693 Join Date: Mar 2006 Location: west chester, PA, USA Age: 20 iTrader: (0)	I would say price between 250-500 (like i said not sure what i want to do yet) and the valves and springs havent been changed out yet...so if you are looking to turbo then i would switch out the springs...and if your gonna pay for new springs you should just do the valves to and make sure its 100% perfect before throwing it on....you dont have to but it does depend on what you are looking to get out of it PS sorry it took so long i was in jamaica for vacation

5-28-08, 11:04	#9 (permalink)
mjmmx693 Join Date: Mar 2006 Location: west chester, PA, USA Age: 20 iTrader: (0)	yeah well the having a shop port and do a 3 angle valve job isnt cheap

5-28-08, 11:06	#10 (permalink)
mjmmx693 Join Date: Mar 2006 Location: west chester, PA, USA Age: 20 iTrader: (0)	i'm willing to let it go for 200... but the job done wasnt by some kid in a basement, it was a local shop that does it as a living

5-28-08, 12:36	#11 (permalink)
ZE Power MX6 Join Date: Jul 2002 Location: Chicago Age: 27 iTrader: (9)	A picture might help, did you change the valve seals?
	M-Edition Turbo - Motor build underway 94 RS - The daily Zoom-Zoom

6-3-08, 16:14	#12 (permalink)
westbranchman Join Date: Jan 2008 Location: Williamsport, PA, USA Age: 44 iTrader: (0)	So what does this head need to go in a non turbo car and what the lowest price shipped to 17701

6-5-08, 11:01	#13 (permalink)
mjmmx693 Join Date: Mar 2006 Location: west chester, PA, USA Age: 20 iTrader: (0)	needs to be bolted up for a non turbo

6-6-08, 12:44	#14 (permalink)
westbranchman Join Date: Jan 2008 Location: Williamsport, PA, USA Age: 44 iTrader: (0)	so whats the best price to 17701